GB/T 24292-2009Sanitary product - air-laid (English PDF)

1 Scope

This standard specifies the sanitary products laid paper (hereinafter referred to as "wipes") classification, technical requirements, test methods, inspection rules and standard

Chi, packaging, transportation and storage requirements.

This standard applies to the processing of disposable hygiene wipes, including synthetic wipes and non-containing superabsorbent resin is high

Common wipes absorbing resin, excluding the non-woven, PE film composite materials made of a composite air-laid paper.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent

Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research

Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.

GB/T 450 and take samples to an aspect of paper and paperboard samples, positive and negative determination (GB/T 450-2008, ISO 186.

2002, MOD)

GB/T 451.2 Paper and paperboard quantitative determination (GB/T 451.2-2002, eqvISO 536.1995)

GB/T 462 paper, board and pulp - Determination of water sample (GB/T 462-2008; ISO 287. 1985, MOD;

ISO 638. 1978, MOD)

Determination of GB/T 1541 Paper and paperboard dust degree

GB/T 7974 paper, paperboard and pulp brightness (whiteness) measured diffusion/vertical method (GB/T 7974-2002, neqISO 2470.

1999)

GB/T 10739 paper, paperboard and pulp sample processing and testing standard atmospheric conditions (GB/T 10739-2002, eqvISO 187.

1990)

GB/T 12914 Paper and board - Determination of tensile strength (GB/T 12914-2008; ISO 1924-1.1992, MOD;

ISO 1924-2.1994, MOD)

GB 15979-2002 Hygienic standard for disposable sanitary products

Category 3 3.1 according to specifications laid paper into the paper tray, party bag paper (flat cutter).