Valid

GB/T 24123-2009Metallized film for capacitors (English PDF)

电容器用金属化薄膜

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 24123-2009 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

June 10, 2009

Implementation date

December 1, 2009

Scope

GB/T 24123-2009 is the English-translated version of 电容器用金属化薄膜.

GB/T 24123-2009 specifies the terms, the product classification, the performance requirements, the test methods, the inspection rules and the marking, packaging, transport and storage of metallized film for capacitors.

Clause 1 applies it to metallized polypropylene film and metallized polyester film for capacitors, and states no exclusions. Clause 2 cites GB/T 2828.1 and GB/T 13542.2-2009.

Clause 3 holds six definitions whose term names the draft does not print: a capacitor plastic film carrying a very thin metal layer deposited on its surface; the plastic film that results when high purity aluminium or zinc is melted and evaporated under high vacuum and deposited as a very thin layer on a base film; the phenomenon by which the film restores, immediately after a local dielectric breakdown, the electrical properties it had before that breakdown; the uncoated insulating strip left at one or both edges of the metallized film, which the page calls the margin and whose width it calls the margin amount; the resistance of the metal layer per unit square of area, which the page calls sheet resistance, expressed in ohms per square and normally used to indicate the thickness of the metal coating; and a metallized film whose patterned metal layer forms a fuse safety structure, which the page divides by the structural features of the fuse into several types, in a list the draft garbles.

The foreword states that the standard was proposed by the China Electrical Equipment Industrial Association, that it falls under the national standardization technical committee for insulating materials (SAC/TC51), and that it was formulated for the first time.

The draft text stops at the end of clause 3, so the classification, requirement, test and inspection clauses announced in clause 1 are not shown. It was issued on 2009-06-10 and has applied since 2009-12-01.

Found what you need?

Document preview — GB/T 24123-2009

National Standard of the People's Republic of China

ICS
29.035.99
Classification
K 15

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions

Foreword

The standard proposed by China Electrical Equipment Industrial Association.

This standard by the National Standardization Technical Committee of the insulating material (SAC/TC51) centralized.

This standard was first formulated.

1 Scope

This standard specifies the metallized film capacitors terms, product classifications, performance requirements, test methods, inspection rules, marking, packaging, Transport and storage.

This standard applies to metallic polypropylene film capacitors and metallized polyester film.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.

GB/T 2828.1 count test procedures - Part 1. batch inspection plans by acceptance quality limit (AQL) retrieval (GB/T 2828.1-2003, ISO 2859-1:1999, IDT)

Test Method. GB/T 13542.2-2009 Electrical insulation film 2 part article (IEC 60674-2. 1988, MOD)

3 Terms and Definitions

The following terms and definitions apply to this standard.

3.1

It can be deposited on the surface layer of very thin metal layer of plastic film capacitors.

3.2

The high purity aluminum or zinc under high vacuum melting, evaporation, deposit base film, the surface of the base film layer of very thin metal layer is formed after plastic film.

3.3

After the metal film dielectric breakdown locally instinct immediately restored to the electrical breakdown properties of the phenomenon before.

3.4

The actual production of capacitors required, metallized film or one or both edges to form a blank cover intermediate insulating metal vapor deposition was not Article (band) called Margin, Margin amount is called its width.

3.5

Metal layer metallized film on the resistance value of the unit square area known as sheet resistance with ohm/square represented, usually sheet resistance To indicate the thickness of the metal coating.

Note: For the square sign see the note to Table 5.

3.6

Patterned metal layer containing metal film fuse security architecture. Press safety fuse structural features can be divided into grid security film, T-shaped safety The whole film and safety film series.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download GB/T 24123-2009

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 24123-2009

$225.00