Valid

GB/T 24111-2009Electrical equipment of industrial machines - Electrical fast transient/burst immunity test specifications (English PDF)

工业机械电气设备电快速瞬变脉冲群抗扰度试验规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (17 pages)

Need quotation for your management?

Get a formal quotation for GB/T 24111-2009 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

June 11, 2009

Implementation date

November 1, 2009

Scope

GB/T 24111-2009 is the English-translated version of 工业机械电气设备电快速瞬变脉冲群抗扰度试验规范.

GB/T 24111-2009 is the Chinese standard "Electrical equipment of industrial machines - Electrical fast transient/burst immunity test specifications".

Its scope clause reads: This standard specifies the electrical machinery industry, electronic equipment and systems to electrical fast transient immunity test requirements, test voltage waveform test Equipment and configuration, test methods and procedures, test result evaluation and prepare test reports, and also provides a different environment and the state of installation Preference test level.

The purpose of this standard is to establish a common, can rebuild, test methods benchmarks to assess when the supply of electrical and electronic equipment Electrical power, signal lines and a control port by the Electrical Fast Transient (burst) immunity.

Standard test methods as established in Assessment under certain circumstances equipment or system immunity general method. This standard applies to industrial machinery and electrical and electronic equipment and systems for electrical fast transient immunity test. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 24111-2009

National Standard of the People's Republic of China

ICS: 29.020
Classification: J 09

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Overview
5 Test Level
6.1 pulse generator
6.2 AC/DC power port of the coupling/decoupling network
6.3 Capacitive coupling clamp
7 Test Configuration
7.1 Test equipment
7.2 type test in the laboratory test configuration
8 Test program
8.1 Laboratory reference conditions
8.2 Test
9 Evaluation of test results
10 13 Test Report
Appendix A (informative) description of the electrical fast transient burst of
Appendix B to select (informative) Test Level
7 capacitive coupling clamp structure in Fig.
6 electric fast transient burst immunity test block diagram
12 Non-stationary EUT test sample port 11 after AC power and protective earth terminal mounting

1 Scope

This standard specifies the electrical machinery industry, electronic equipment and systems to electrical fast transient immunity test requirements, test voltage waveform test

Equipment and configuration, test methods and procedures, test result evaluation and prepare test reports, and also provides a different environment and the state of installation

Preference test level.

The purpose of this standard is to establish a common, can rebuild, test methods benchmarks to assess when the supply of electrical and electronic equipment

Electrical power, signal lines and a control port by the Electrical Fast Transient (burst) immunity. Standard test methods as established in

Assessment under certain circumstances equipment or system immunity general method.

This standard applies to industrial machinery and electrical and electronic equipment and systems for electrical fast transient immunity test.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent

Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research

Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.

GB/T 4365-2003 Electrotechnical terminology Electromagnetic compatibility (IEC 60050 (161).1990, IDT)

GB/T 17626.4-2008 Electromagnetic compatibility - Testing and measurement techniques - Electrical fast transient burst immunity test (IEC 61000-

4-4.2004, IDT)

3 Terms and Definitions

This standard uses the following terms and definitions.

3.1

A limited number of distinct pulses or a series of a finite duration oscillations.

3.2

Under specified conditions, based on the relationship test descriptions and results assessed by reference to the correction.

Note 1. Based on the word "uncertainty" study.

Note 2. In principle, the relationship between notes and test results using calibration tables to represent.

3.3 Interaction between the lines

Energy is transferred from one line to another line.

[GB/T 17626.4-2008 in 3.3]

3.4

All lines simultaneously coupling.

3.5

In a test with no line is electrically connected to the case, in the form of common mode interfering signals are coupled to the test circuit, having a predetermined size

GB/T 23819-2023 | GB/T 23821-2022 | GB/T 26118.1-2010 | GB/T 17889.7-2026 | GB/T 16855.1-2025 | GB/T 24112-2009 | […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.

Similar standards

GB/T 13869-2026|GB/T 24114.2-2026|GB/T 33589-2026|GB/T 33592-2026|GB/T 33593-2026|GB/T 33603-2026

How to Download GB/T 24111-2009

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.