Valid

GB/T 2382-2015Sulphur dyes - Determination of content of free sulphur (English PDF)

硫化染料 游离硫磺含量的测定

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 2382-2015 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

May 15, 2015

Implementation date

December 1, 2015

Scope

GB/T 2382-2015 is the English-translated version of 硫化染料 游离硫磺含量的测定.

GB/T 2382-2015 is the Chinese standard "Sulphur dyes - Determination of content of free sulphur". Its scope clause reads: This standard specifies the method for the determination of free sulfur content of sulfur.

This standard applies to the determination of free sulfur content of sulfur. Its clauses include principle of measurement; determination.

Found what you need?

Document preview — GB/T 2382-2015

National Standard of the People's Republic of China

ICS
71.100.01
Classification
G 55
Replacing
GB/T 2382-2007

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Principle of Measurement
  • 4 Determination

1 Scope

This standard specifies the method for the determination of free sulfur content of sulfur.

This standard applies to the determination of free sulfur content of sulfur.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

Preparation of GB/T 601 chemical reagent standard titration solution

GB/T 603 chemical reagent in test methods - Preparations with

Laboratory use specifications and test methods GB/T 6682-2008 Analysis

GB/T 8170-2008 revised value represents about rules and limit values and judgment

3 Principle of Measurement

Extraction with an organic solvent free from sulfur in the sulfur dye, and then the organic solvent was distilled off, the residue was then reacted with sodium sulfite, with

Iodine titration standard solution titration. Standard iodine titration solution free sulfur content is calculated according to consumption.

S Na2SO3 -> Na2S2O3

2Na2S2O3 I2 -> 2NaI Na2S4O6

4 Determination

Warning --- volatile organic solvent used in this standard is harmful to human health and the Flammable vapor can form explosive mixtures with air,

It should be performed in a fume hood, and prevent contact with open flame.

4.1 General provisions

Unless otherwise specified, use only recognized as analytical reagents and GB/T 6682-2008 specified in the third grade water. Test used in the standard

Quasi titration solution and indicator, did not indicate when the other requirements, according to GB/T 601 and GB/T 603 requirements Preparation and calibration. test

The results of the determination of GB/T 8170-2008 4.3.3 Rounding the value comparison method.

4.2 Reagents and solutions

4.2.1 filter

rapid qualitative filter paper.

4.2.2

toluene.

4.2.3

Anhydrous sodium sulfite.

4.2.4 acetic acid solution

36% (mass fraction).

4.2.5 Formaldehyde solution

37% to 40% (by mass).

4.2.6 standard iodine titration solution

c 12I2

÷ = 0.1mol/L.

GB/T 24164-2020 | GB/T 23978-2020 | GB/T 2374-2017 | GB/T 2387-2025 | GB/T 2378-2025 | […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

Editions of GB/T 2382

EditionTitleRevisionStatus
GB/T 2382-2015Sulphur dyes - Determination of content of free sulphurcurrent editionCurrent
GB/T 2382-2007Sulphur dyes - Determination of content of free sulphurprevious editionSuperseded

This page sells the current edition, GB/T 2382-2015. Earlier editions are listed for reference only.

How to Download GB/T 2382-2015

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 2382-2015

$85.00