GB/T 23561.6-2009Methods for determining the physical and mechanical properties of coal and rock - Part 6: Methods for determining the moisture content of coal and rock (English PDF)
煤和岩石物理力学性质测定方法 第6部分:煤和岩石含水率测定方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 23561.6-2009 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
April 8, 2009
Implementation date
December 1, 2009
Scope
GB/T 23561.6-2009 is the English-translated version of 煤和岩石物理力学性质测定方法 第6部分:煤和岩石含水率测定方法.
GB/T 23561.6-2009 is the Chinese standard "Methods for determining the physical and mechanical properties of coal and rock - Part 6: Methods for determining the moisture content of coal and rock".
Its scope clause reads: GB/T 23561 This section provides definitions of terms and determination of moisture content of coal and rock involved, equipment, test procedures and data Calculations.
This section applies to the determination of moisture content of coal and rock. This part drying method to test the moisture content of coal and rock, not suitable for mineral Containing crystal water and rock containing water of crystallization.
Its clauses include terms and definitions; equipment; test procedure; data calculation.
Found what you need?
Document preview — GB/T 23561.6-2009
National Standard of the People's Republic of China
- ICS
- 73.010
- Classification
- D 04
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Terms and definitions
- 3 Equipment
- 4 Test Procedure
- 5 Data Calculation
1 Scope
GB/T 23561 This section provides definitions of terms and determination of moisture content of coal and rock involved, equipment, test procedures and data
Calculations.
This section applies to the determination of moisture content of coal and rock. This part drying method to test the moisture content of coal and rock, not suitable for mineral
Containing crystal water and rock containing water of crystallization.
2 Terms and definitions
The following terms and definitions apply to this part of the GB/T 23561 of.
2.1
Water quality than the quality of its after drying rocks contained in the natural state.
2.2
Water quality than the quality of its after drying the coal contained in the natural state.
3 Equipment
The main equipment are.
a) balance. a sense of the amount (minimum scale) 0.01g;
b) oven;
c) the dryer;
d) wire brush, hammer;
e) a sealing cover having a sample cell.
4 Test Procedure
4.1
aqueous taken to maintain the natural state, the composition of greater than 10 times the size of the largest rock mineral grain diameter, and less than three mass of 50g
Specimen was weighed immediately M1.
4.2
and containing no crystal water sample in an oven at 105 °C ~ 110 °C after 24h drying out, placed in a desiccator to cool to room temperature, said
Too heavy to M2.
4.3
The samples containing crystal water in an oven at 55 °C ~ 65 °C drying out after 24h, cooled in a desiccator to ambient, weighed,
Too M2.
5 Data Calculation
According to equation (1) to calculate the measurement results.
W1 = M1M2- () 1 × 100% (1) […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 23561.6-2009
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 23561.7-2009 — Methods for determining the physical and mechanical properties of coal and rock - Part 7: Methods for determining the uniaxial compressive strength and counting softening coefficient
GB/T 23561.5-2009 — Methods for determining the physical and mechanical properties of coal and rock - Part 5: Methods for determining the water absorbability of coal and rock
GB/T 23561.8-2024 — Methods for determining the physical and mechanical properties of coal and rock - Part 8: Methods for determining the deformation parameters of coal and rock
GB/T 23561.6-2009
$90.00