GB/T 23154-2008Safety requirements and test methods of filling materials in toys for import and export (English PDF)
进出口玩具填充材料安全要求及测试方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 23154-2008 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 30, 2008
Implementation date
September 1, 2009
Scope
GB/T 23154-2008 is the English-translated version of 进出口玩具填充材料安全要求及测试方法.
GB/T 23154-2008 is the Chinese standard "Safety requirements and test methods of filling materials in toys for import and export". Its scope clause reads: This standard specifies the safety requirements and test methods for the import and export of toys in the filling material.
This standard applies to the following design or intended for children under the age of 14 and play a variety of toys containing filler. --- Plush and cloth toys; --- Soft-filled toys; --- Liquid-filled toys.
This standard does not apply to the following materials or components. --- Does not meet the regulatory requirements or special conditions of toys for children to use the filler material to the object and use; --- Ultimate goal is not to make use of the play model, a recreational or leisure craft products in the filling material; --- Not for children under 14 years of age and design collections of filler material; --- Holiday decorations filler material; --- Installed in public places (such as streets and malls) toys filler; --- Batteries and electronics, toys, electrical components contained within; --- Load pigments, dyes fingernail or similar products inside the container; --- Electrolyte of the battery. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 23154-2008
National Standard of the People's Republic of China
- ICS
- 97.190
- Classification
- Y 04
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
1 Scope
This standard specifies the safety requirements and test methods for the import and export of toys in the filling material.
This standard applies to the following design or intended for children under the age of 14 and play a variety of toys containing filler.
--- Plush and cloth toys;
--- Soft-filled toys;
--- Liquid-filled toys.
This standard does not apply to the following materials or components.
--- Does not meet the regulatory requirements or special conditions of toys for children to use the filler material to the object and use;
--- Ultimate goal is not to make use of the play model, a recreational or leisure craft products in the filling material;
--- Not for children under 14 years of age and design collections of filler material;
--- Holiday decorations filler material;
--- Installed in public places (such as streets and malls) toys filler;
--- Batteries and electronics, toys, electrical components contained within;
--- Load pigments, dyes fingernail or similar products inside the container;
--- Electrolyte of the battery.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB 6675-2003 National Safety Technical Code for Toys
GB/T 6753.4-1998 Paints and varnishes - Determination of flow time by use of flow cups (GB/T 6753.4-1998, eqv ISO 2431.
1993)
ASTMF963 Standard Consumer Safety Specification. Toy Safety
EN71-5 Toy Safety Standard Part 5. In addition to the experimental apparatus chemical toys (sets)
3 Terms and Definitions
GB 6675 and established the following terms and definitions apply to this standard.
3.1
Fill in for all plush and cloth toys, soft toys stuffed toys or liquid filling material.
3.2
A material or product the ability to burst into flames under specified test conditions.
3.3
A flash point of not less than 21 °C and 55 °C or less of the liquid material.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 23154-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 23154-2008
$125.00