GB/T 21531-2008MFBD type steel wire knotter (English PDF)

1 Scope

This standard specifies the MFBD type wire deduction scope and type of application, technical requirements, test methods, inspection rules and signs,

Packaging, transportation and storage.

This standard applies to fight the system in line with GB/T 21530 cotton packaged with galvanized steel wire and having a total length of 1750mm ~ 2350mm

Buckle type wire wire MFBD deduction.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent

Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research

Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.

GB/T 191 Packaging - Pictorial signs

GB/T 6388 transport package shipping mark

GB/T 13384 mechanical and electrical products packaging General technical conditions

GB/T 21530 cotton packing with galvanized steel wire

3 Models

Cotton processing machinery Code

Category Code. Ancillary equipment

Category Code. cotton coated steel wire

Feature code. deduction

XX ----

Main parameters. chipped maximum nominal wire diameter (mm) 10 times

---

Type wire deduction

Modification No.

4. Technical Requirements 4.1 Wire deduction shall conform to the requirements of the standard, in accordance with prescribed procedures approved manufacturing drawings and technical documents.