Valid

GB/T 20413-2017Single superphosphate (English PDF)

过磷酸钙

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 20413-2017 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 29, 2017

Implementation date

July 1, 2018

Scope

GB/T 20413-2017 is the English-translated version of 过磷酸钙.

GB/T 20413-2017 is the Chinese national product standard for single superphosphate, the fertilizer obtained by reacting sulfuric acid with phosphate rock, whose main components are calcium phosphate and calcium sulfate.

It gives the terms and definitions, requirements, test methods, inspection rules, marking, packaging, transport and storage of the product. It applies to loose and granular single superphosphate made industrially by treating phosphate rock.

Compared with the 2006 edition it adds requirements and determination methods for water-soluble phosphorus and sulfur, limits for arsenic, cadmium, lead, chromium, mercury, volatile organic compounds and trichloroacetaldehyde, and more detailed rules for product marking and packaging.

Loose superphosphate must meet the indicators of its table and the values declared on the product. It replaces GB 20413-2006, was issued on 29 December 2017 and has applied since 1 July 2018.

Found what you need?

Document preview — GB/T 20413-2017

National Standard of the People's Republic of China

ICS
65.080
Classification
G 21
Replacing
GB 20413-2006

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Requirements

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

This standard replaces GB/T 20413-2006 "superphosphate." Compared with GB/T 20413-2006, the main technical changes are as follows.

--- Increased water-soluble phosphorus, sulfur requirements and determination methods;

--- Increasing the arsenic, cadmium, lead, chromium, mercury, volatile organic compounds, the requirements and determination of trichloroacetaldehyde limits;

--- Refine the product identification, packaging requirements.

1 Scope

This standard specifies the terms and definitions of superphosphate, requirements, test methods, inspection rules, marking, packaging, transportation and storage.

This standard applies to industrial-made phosphate rock phosphate treatment of loose and granular superphosphate products.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this document. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 6003.1-2012 Test sieves - Technical requirements and testing - Part 1: Wire mesh sieve test sieves

GB/T 6679 General rules for sampling solid chemical products

Representation and determination of rules for repair of numerical values and limit values GB/T 8170-2008

GB/T 8569 solid chemical fertilizer packaging

GB 18382 fertilizer labeling content and requirements

Determination of calcium, magnesium and sulfur in compound fertilizers GB/T 19203-2003

GB/T 22923 fertilizer nitrogen, phosphorus and potassium automatic analyzer assay

GB/T 23349 fertilizer arsenic, cadmium, lead, chromium, mercury ecological indicators

GB/T 31266 Determination of trichloroacetaldehyde in superphosphates

HG/T 2843 chemical analysis of fertilizer products commonly used standard titration solution, standard solution, reagent solution and indicator solution

Determination of Calcium, Magnesium, Sulfur and Chlorine in Water - Soluble Fertilizers

3 Terms and definitions

The following terms and definitions apply to this document.

3.1 Single superphosphate

With sulfuric acid and phosphate rock reaction generated to calcium phosphate and calcium sulfate as the main component of the product.

3.2 Volatile organic compounds

Organic compounds boiling below 80 ° C at one atmospheric pressure.

4 Requirements

4.1 Loose superphosphate

4.1.1 Appearance. Loose, no mechanical impurities.

4.1.2 Loose superphosphate should meet the requirements of Table 1, at the same time should meet the indicated value.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of GB/T 20413

EditionTitleRevisionStatus
GB/T 20413-2017Single superphosphatecurrent editionCurrent
GB 20413-2006Single superphosphateprevious editionSuperseded

This page sells the current edition, GB/T 20413-2017. Earlier editions are listed for reference only.

How to Download GB/T 20413-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 20413-2017

$205.00