Valid

GB/T 20001.10-2014Rules for drafting standards—Part 10: Product standards (English PDF)

标准编写规则第10部分：产品标准

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 20001.10-2014 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 31, 2014

Implementation date

June 1, 2015

Scope

GB/T 20001.10-2014 is the English-translated version of 标准编写规则第10部分：产品标准.

GB/T 20001.10-2014 is the Chinese standard "Rules for drafting standards—Part 10: Product standards".

Its scope clause reads: This part of GB/T 20001 specifies the principles to be followed in drafting product standards, the structure of product standards, the drafting requirements and expression rules of elements, and the selection method of numerical values.

This part is applicable to the drafting of national, professional, provincial and company product standards. To be specific, it is applicable to the drafting standards for tangible products, while it can be used for reference in drafting standards for intangible products. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 20001.10-2014

National Standard of the People's Republic of China

ICS: 01.120
Classification: A 00

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Foreword i
Introduction ii
1 Scope
2 Normative references
3 Terms and definitions
4 General
4.1 Normalization
4.2 Selection principles of technical elements
4.3 Avoidance of duplication and unnecessary deviations
5 Structure
6 Drafting of elements
6.1 Introduction
6.2 Standard name
6.3 Scope
6.4 Classification, marking and coding
6.5 Technical requirements
6.6 Sampling
6.7 Test method
6.8 Inspection rules
6.9 Marking, labeling and accompanying documents
6.10 Packaging, transportation and storage
7 Choice of numerical values
7.1 Limiting values
7.2 Selected values
7.3 Values determined by the supplier
Annex A (Informative) Quality evaluation procedures and inspection rules
Annex B (Informative) Preparation rules of packaging, transportation and storage requirements
Bibliography

1 Scope

This part of GB/T 20001 specifies the principles to be followed in drafting product standards, the structure of product standards, the drafting requirements and expression rules of elements, and the selection method of numerical values.

2 Normative references

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

GB/T 1.1 Directives for standardization - Part 1: Structure and drafting of standards

GB 190 Packing symbol of dangerous goods

GB/T 191 Packaging - Pictorial marking for handling of goods

GB/T 321 Preferred numbers - Series of preferred numbers

GB 5296 (All parts) Instructions for use of products of consumer interest

GB/T 6388 Transport package shipping mark

GB/T 9969 General principles for preparation of instructions for use of industrial products

GB/T 20000.1 Guidelines for standardization - Part 1: Standardization and related actives - General vocabulary

GB/T 20000.4-20031) Guide for standardization - Part 4: Safety aspects for their inclusion in standards

GB/T 20001.4 Rules for drafting standards - Part 4: Methods of chemical analysis

GB/T 20002.3 Drafting for special aspects in standards - Part 3: Addressing environmental issues in product standards

GB/T 27000 Conformity assessment - Vocabulary and general principles

3 Terms and definitions

For the purposes of this document, the terms and definitions specified in GB/T 20000.1 and GB/T 27000 and the following apply. For the convenience of application, some terms and definitions in GB/T 20000.1 are listed repeatedly as follows.

3.1 product standard

standard to specify the requirements that products need to meet to ensure their applicability

Note 1 to entry: Apart from applicability requirements, product standards may also include requirements, such as terminology, sampling, testing, packaging and labeling, directly or by reference, and sometimes they may include process requirements.

Note 2 to entry: Product standards can be classified into complete ones and incomplete ones according to whether they specify necessary requirements in full or in part. Based on this, product standards can be classified into several types, such as standards on dimensions, materials and general technical rules for delivery.

Note 3 to entry: If a standard only includes one item such as classification, test method, marking and labeling, etc., it will be regarded as a classification standard, test method standard or marking standard respectively, but not a product standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Cited by

Similar standards

GB/T 20000.10-2026|GB/T 47013.1-2026|GB/T 47180-2026|GB/T 47366-2026|GB/T 47483-2026|GB/T 48000.2-2026

How to Download GB/T 20001.10-2014

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.