GB/T 1981.5-2009Varnishes used for electrical insulation - Part 5: Energy-saving fast curing melamine alkyd impregnating varnishes (English PDF)

Foreword

GB/T 1981 "for electrical insulation paint" is divided into the following sections.

--- Part 1. Definitions and general requirements;

--- Part 2. Test methods;

--- Part 3. General specification for hot curing impregnating varnishes;

--- Part 4. polyester-imide varnish;

--- Part 5. Fast energy-curable melamine alkyd varnish; This section GB/T 1981 Part 5: […]

1 Scope

GB/T 1981 This section provides fast curing melamine alkyd varnish energy-saving models, requirements, test methods, inspection regulations Then, packaging, labeling, storage and transportation.

This section applies to Class B energy-saving fast curing melamine alkyd varnish.

2 Normative references

The following documents contain provisions which, through reference to GB/T 1981 to the present, constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section.

GB/T 1981.1-2007 electrical insulating paints - Part 1: Definitions and general requirements (IEC 60464-1:1998, IDT)

GB/T 1981.2-2009 electrical insulating paints - Part 2: Test methods (IEC 60464-2:2001, MOD)

3 Models

Class B Fast curing energy-melamine alkyd varnish of model. 1038.

4 Requirements

All materials one delivery, in addition shall comply with the requirements of GB/T 1981.1-2007 prescribed, it should also comply with this section in Table 1 Performance requirements.