GB/T 19632-2023Classification and code of funeral services, facilities, equipments, supplies (English PDF)

Foreword

This document was issued on 7 September 2023 by the State Administration for Market Regulation; Standardization Administration of the PRC and takes effect on 7 September 2023.

It is a GB/T standard: recommended rather than compulsory, but it is the text a Chinese reviewer applies when assessing a submission.

It is classified under ICS 11.020, Chinese classification A24.

It replaces GB/T 19632-2005, which is superseded.

This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1.Structure and Drafting Rules of Standardization Documents"

Drafting.

This document replaces GB/T 19632-2005 "Classification and Code of Funeral Services, Facilities and Supplies" and is consistent with GB/T 19632-2005

In addition to structural adjustments and editorial changes, the main technical changes are as follows.

a) The standard name has been changed to "Classification and Code of Funeral Services, Facilities, Equipment and Supplies";

b) Changed the "code structure" (see 5.2, 5.1 of the.2005 version);

c) The “National Funeral Unit Identification Code” is deleted (see 5.2 of the.2005 edition);

d) Changed the "code list for funeral services, funeral facilities and funeral supplies" (see Table 1, Table 1 of the.2005 version);

e) The "check code" is deleted (see 5.5 of the.2005 version);

f) The codes, service names and classification contents in the "Funeral Service Classification Code Table" have been changed (see Table 2, Table 2 of the.2005 version);

g) The codes, facility names and classification contents in the "Funeral Facilities Classification Code Table" have been changed (see Table 3, Table 3 of the.2005 version);

h) Added "Funeral Equipment Classification Code List" (see Table 4);

i) Changed the codes, product names and classification contents in the "Funeral Supplies Classification Code Table" (see Table 5, Table 4 of the.2005 version);

j) Appendix A, Appendix B and Appendix C are deleted (see Appendix A, Appendix B and Appendix C of the.2005 version).

Please note that some content in this document may be subject to patents. The publisher of this document assumes no responsibility for identifying patents.

This document is proposed by the Ministry of Civil Affairs of the People's Republic of China.

This document is under the jurisdiction of the National Funeral Standardization Technical Committee (SAC/TC354).

This document was drafted by. Shanghai Funeral Service Center, Shanghai Longhua Funeral Home, Shanghai Baoxing Funeral Home, Shanghai Yishan Funeral Home

Museum, Shanghai Binhai Ancient Garden, Shanghai Chenyu Crafts Co., Ltd., Shanghai Shinjuku Standardization Technical Service Center, Beijing Babaoshan Funeral Home,

Jinan Jinmin Electronic Technology Co., Ltd., Zhejiang Zhongchan Holdings Co., Ltd.

The main drafters of this document. Cheng Jian, Wei Chao, Huang Shuoye, Chen Zhirui, Zhang Lifen, Wang Gang, Li Jun, Wu Jie, Cao Baofu, Liu Yong, Li Zhongyu,

Zheng Tao, Zhu Xiaohong, Pan Keliang, Zhao Li, Gao Shifeng, Li Haijun, Xia Lingling.

The previous versions of this document and the documents it replaces are as follows.

---First published as GB/T 19632-2005 in.2005;

---This is the first revision.

Classification and coding of funeral services, facilities, equipment and supplies

1 Scope

GB/T 19632-2023 gives the funeral sector a single classification and a numeric code for what it provides: services, facilities, equipment and supplies. The category clause sets out the classification method and the basis on which those four domains are divided; the coding clause gives the rules and the code structure, a five-digit code built from a major category digit, a medium category and a minor category, so a code can be read back to the class it came from. Four classification code tables then carry the classification itself, one for each domain, with terminology taken from GB/T 23287. Funeral provision in China is administered, funded and inspected across many authorities at once, and until the same cremation furnace or the same interment service is written down the same way in every register, statistics cannot be added together, procurement catalogues cannot be compared, and one information system cannot hand its records to another without someone re-keying them. This edition replaces the 2005 text, whose title named services, facilities and supplies without listing equipment as a domain of its own. Civil affairs administrations, funeral service providers, equipment and supplies manufacturers, and the people building sector information systems are the users.

This document specifies the classification, coding methods and classification code table for funeral services, facilities, equipment and supplies.

This document applies to information statistics and management of funeral services, facilities, equipment and supplies, as well as related information exchange and sharing.

2 Normative reference documents

The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, the dated quotations

For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to

this document.

GB/T 23287 Funeral terminology

3 Terms and definitions

The terms and definitions defined in GB/T 23287 apply to this document.

4 categories

4.1 Classification method

Funeral services, facilities, equipment and supplies are divided using line classification.

4.2 Basis for classification

4.2.1 The classification of funeral services is based on the funeral process, burial style and post-burial services.

4.2.2 The classification of funeral facilities and equipment is based on their uses.

4.2.3 The classification of funeral supplies is based on their uses, taking into account the materials, specifications and other attributes of the supplies.