GB/T 19145-2022Determination for total organic carbon in sedimentary rock (English PDF)
沉积岩中总有机碳测定
This is a limited preview
Buy now to download the full PDF (16 pages)
Need quotation for your management?
Get a formal quotation for GB/T 19145-2022 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
March 9, 2022
Implementation date
October 1, 2022
Scope
GB/T 19145-2022 is the English-translated version of 沉积岩中总有机碳测定.
GB/T 19145-2022 is the Chinese national method for determining the total organic carbon of a sedimentary rock.
It gives the analytical procedure - the preparation of the sample, the removal of the carbonate carbon by acid, the combustion and the measurement of the carbon dioxide produced - together with the apparatus, the calibration, the calculation of the result and the quality requirements the analysis has to meet.
It applies to sedimentary rocks and modern sediments, where the organic carbon figure is what tells a geologist whether a formation can be a source rock. Petroleum geology laboratories and geological surveys use it.
It replaces GB/T 19145-2003, was issued on 9 March 2022 and has applied since 1 October 2022.
Found what you need?
Document preview — GB/T 19145-2022
National Standard of the People's Republic of China
- ICS
- 75.010
- Classification
- E 11
- Replacing
- GB/T 19145-2003
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Method principle
- 5 Reagents and Materials
- 6 Instruments and equipment
- 7 Analysis step
- 8 Precision
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents" drafted.
This document replaces GB/T 19145-2003 "Determination of Total Organic Carbon in Sedimentary Rocks". Compared with GB/T 19145-2003, except for structural In addition to adjustments and editorial changes, the main technical changes are as follows.
a) Deleted some instruments and equipment (see Chapter 5 of the.2003 edition);
b) Added quality requirements for reagents and materials (see 5.1, 5.2, 5.6, 5.10, 5.15);
c) increased the particle size range of broken samples (see 7.2.1);
d) Changed the sample washing steps (see 7.2.4, 5.4 of the.2003 edition);
e) Added the process of instrument calibration (see 7.3.2);
f) Increased the weighing range of flux (see 7.3.2, 7.3.4, 7.3.5);
g) Changed the measurement precision (see Chapter 8, Chapter 6 of the.2003 edition);
h) Deleted environmental protection requirements (see Chapter 7 of the.2003 edition).
1 Scope
This document specifies the analytical procedures and quality requirements for total organic carbon in sedimentary rocks.
This document applies to the determination of total organic carbon in sedimentary rocks and modern sediments.
2 Normative references
There are no normative references in this document.
3 Terms and Definitions
There are no terms and definitions that need to be defined in this document.
4 Principles of the method
After removing the inorganic carbon in the sample with hydrochloric acid, it is burned in a high-temperature oxygen stream to convert the total organic carbon into carbon dioxide, which is detected by an infrared detector. The total organic carbon content is detected and given.
5 Reagents and Materials
5.1 Hydrochloric acid. analytically pure.
5.2 Distilled water.
5.3 Magnesium perchlorate. analytically pure.
5.4 Alkali asbestos.
5.5 Fiberglass
5.6 Quartz glass fibers.
5.7 Special cotton for desulfurization.
5.8 Platinum Silicone.
5.9 Iron filing flux. w(C)< 0.002%, w(S)< 0.002%
5.10 Tungsten particle flux. w(C)< 0.001%, w(S)< 0.001%, particle size 0.35mm~0.83mm.
5.11 Standard sample. the national standard material of various carbon contents.
5.12 Porcelain crucible. special for carbon and sulfur analysis.
5.13 Oxygen. the purity is not less than 99.9%
5.14 Power gas. compressed air or nitrogen.
5.15 pH paper.
6 Instruments and equipment
6.1 Carbon-sulfur analyzer or carbon analyzer.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 16 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of GB/T 19145
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 19145-2022 | Determination for total organic carbon in sedimentary rock | current edition | Current |
| GB/T 19145-2003 | Determination for total organic carbon in sedimentary rock | previous edition | Superseded |
This page sells the current edition, GB/T 19145-2022. Earlier editions are listed for reference only.
How to Download GB/T 19145-2022
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 19145-2022
$90.00