GB/T 18024.6-2010Graphical symbols for the technical documentation of coal mine machinery - Part 6: Graphical symbols for surface mine machinery (English PDF)
煤矿机械技术文件用图形符号 第6部分：露天矿机械图形符号
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 18024.6-2010 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 26, 2010
Implementation date
February 1, 2011
Scope
GB/T 18024.6-2010 is the English-translated version of 煤矿机械技术文件用图形符号 第6部分：露天矿机械图形符号.
GB/T 18024.6-2010 is the Chinese standard "Graphical symbols for the technical documentation of coal mine machinery - Part 6: Graphical symbols for surface mine machinery".
Its scope clause reads: GB/T 18024 in the provisions of this part of the open-pit mine machinery graphical symbols and rules. This section applies to coal open-pit mine design drawings and technical documents, but also for other industries technical documentation similar machinery.
Its clauses include rules for use symbols; graphical symbols for surface mine machinery.
Found what you need?
Document preview — GB/T 18024.6-2010
National Standard of the People's Republic of China
- ICS
- 01.080.20
- Classification
- D 04
- Replacing
- GB/T 18024.6-2000
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Rules for use symbols
- 4 Graphical symbols for surface mine machinery
1 Scope
GB/T 18024 in the provisions of this part of the open-pit mine machinery graphical symbols and rules.
This section applies to coal open-pit mine design drawings and technical documents, but also for other industries technical documentation similar machinery.
2 Normative references
The following documents contain provisions which, through reference GB/T 18024 in this section constitute provisions of this section. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section.
GB/T 16901.1 technical documents represent the first part of the rule of graphical symbols. Basic rules (GB/T 16901.1-2008,
ISO 81714-1.1999, MOD)
GB/T 17450 Technical drawings Chart (GB/T 17450-1998, idt ISO 128-20.1996)
3 Rules for use symbols
3.1
graphical symbols, applications GB/T 17450 stipulated line drawing.
3.2
Part predetermined direction graphic symbols as needed can be rotated a certain angle or into a mirrored configuration.
Graphical symbols specified in section 3.3 is based on GB/T 16901.1 requirements, design 0.125M lattice grid system for regulation
The proportion of fixed symbols, graphic symbols can be different in different directions in the same proportion or ratio of the need to make appropriate adjustments according to use, but it should be fully
Original graphical symbols transmitted information.
General symbol specified in Section 3.4, for use in the expression of specific types of objects without specified occasions.
4 Graphical symbols for surface mine machinery
Opencast mining machinery Graphical symbols shown in Table 1.
Table 1 Graphical symbols for surface mine machinery
No Graphic Symbol Name Description
6-01
Rig drilingmachine
General symbol
6-02 excavator excavator
General symbol […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
Editions of GB/T 18024.6
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 18024.6-2010 | Graphical symbols for the technical documentation of coal mine machinery - Part 6: Graphical symbols for surface mine machinery | current edition | Current |
| GB/T 18024.6-2000 | Graphical symbols for the technical documentation of coal mine machinery - Part 6: Graphical symbols for surface mine machinery | previous edition | Superseded |
This page sells the current edition, GB/T 18024.6-2010. Earlier editions are listed for reference only.
How to Download GB/T 18024.6-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 18024.7-2010 — Graphical symbols for the technical documentation of coal mine machinery - Part 7: Graphical symbols for compressor, fan and pump
GB/T 18024.5-2010 — Graphical symbols for the technical documentation of coal mine machinery - Part 5: Graphical symbols for machinery of ground production and hoisting
GB/T 18024.4-2010 — Graphical symbols for the technical documentation of coal mine machinery - Part 4: Graphical symbols for underground haulage machinery
Secure payment via Stripe
Payments accepted
GB/T 18024.6-2010
$85.00