GB/T 17444-2013Measuring methods for parameters of infrared focal plane arrays (English PDF)
红外焦平面阵列参数测试方法
This is a limited preview
Buy now to download the full PDF (21 pages)
Need quotation for your management?
Get a formal quotation for GB/T 17444-2013 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 12, 2013
Implementation date
April 15, 2014
Scope
GB/T 17444-2013 is the English-translated version of 红外焦平面阵列参数测试方法.
GB/T 17444-2013 is the Chinese standard "Measuring methods for parameters of infrared focal plane arrays". Its scope clause reads: The standard for infrared focal plane arrays and related parameters are defined amount.
This standard gives the test methods and test conditions characteristic parameters of infrared focal plane arrays. This standard applies to lines and columns plane array infrared focal plane arrays. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 17444-2013
National Standard of the People's Republic of China
- ICS
- 31.260
- Classification
- L 52
- Replacing
- GB/T 17444-1998
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Terms and definitions
- 4.1 Method 3001. response rates and response rates unevenness
- 3002 4.2 Method. Noise voltage
- 4.3 Method 3003. 9 detection rate
- 3004 4.4 Method. Noise Equivalent Temperature Difference
- 4.5 Method 3005. effective pixel rate of
- 4.6 Method 3006. fixed pattern noise
- 3007 4.7 Method. Noise Equivalent Power
- 4.8 Method 3008. saturated irradiation power
- 4.9 Method 3009. Dynamic Range
- 4.10 Method 3010. relative spectral responsivity of
- 4.11 Method 3011. readout rate, frame rate
- 4.12 Method 3012. 15 Crosstalk
- Appendix A (normative) represents a response rate of 17 other
- Appendix B (normative) spatial noise
- Annex C (informative) alternate parameters and related amount
- Annex D (informative) Test Method 20 Modulation Transfer Function
- Appendix E (normative) Test Method 22 nonlinearity
- Annex F (normative) A preferred algorithm
1 Scope
The standard for infrared focal plane arrays and related parameters are defined amount.
This standard gives the test methods and test conditions characteristic parameters of infrared focal plane arrays.
This standard applies to lines and columns plane array infrared focal plane arrays.
2 Terms and definitions
The following terms and definitions apply to this document.
2.1 IRFPA infraredfocalplanearrays; IRFPA
Infrared radiation (hereinafter referred to as radiation) sensitive detector array device with a readout circuit, referred to the infrared focal plane.
2.2 Pixel
Sensitive element infrared detector array.
2.3 Frame period
Plane array infrared focal plane a signal integration time and reading needs.
2.4 Frame rate framefrequence
Side focal plane array infrared signal output time frames within 1s.
2.5 Line period
IRFPA line signal integration and readout time required.
2.6 Line frequency
Infrared focal plane signal output the number of lines in the 1s time.
2.7 Integration time
In the frame period or line period, the cumulative radiation of infrared focal plane an effective time charge.
2.8 Readout rate pixelrate
Infrared Focal Plane pixel signal read-out rate.
2.9 Charge capacity
Infrared focal plane can accommodate the maximum number of signal charge.
2.10 Irradiation power
A total power incident on the image on the element.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 21 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of GB/T 17444
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 17444-2013 | Measuring methods for parameters of infrared focal plane arrays | current edition | Current |
| GB/T 17444-1998 | Measuring methods for parameters of infrared focal plane arrays | previous edition | Superseded |
This page sells the current edition, GB/T 17444-2013. Earlier editions are listed for reference only.
How to Download GB/T 17444-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 17444-2013
$375.00