GB/T 36297-2018Field test characteristics of optical remote sensing payload (English PDF)

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

Introduction

The observation range of the optical remote sensing load is generally between 0.30 µm and 15 µm. In this spectral range, ultraviolet and visible light are included. Light to infrared spectral information. The optical remote sensing load field test is one of the effective measures for the detection of load performance indicators, not only the number of loads. According to the premise and basis of application, it is also the technical basis and criteria for load acceptance. According to the purpose of remote sensing applications, the design of the load refers to The differences between the standards and the definitions are very big, which will inevitably lead people to misunderstand the definition of different optical load performance indicators and the understanding of the measurement unit is not the same. Therefore, the quantification of the optical load performance evaluation index cannot be achieved, which limits the sharing and propagation of load data and multi-source remote sensing. The combined use of data.

This standard addresses the most widely used passive optical remote sensing payloads currently used in various disciplines and industries, through the deep testing of load performance. Into the analysis, select passive optical remote sensing loadability that is directly related to remote sensing data or product quality and can be evaluated by field test Can evaluate the indicators, give a clear definition of these evaluation indicators and corresponding dimensions, and then to ensure the performance of passive optical remote sensing load performance evaluation Indicators can share the same set of reference standards in different research and application fields, providing technical parameters for the development of new optical remote sensing loads in the future. Examine and provide relevant data source quality and performance assurance for the production and application of subsequent remote sensing products.

1 Scope

This standard specifies the spatial geometric performance, radiation performance, and spectral performance evaluation indicators of the passive optical remote sensing load field test. definition.

This standard is applicable to the optical sensing spectrum range of 0.30µm~15µm in the working band, and the passiveness of the aviation or aerospace platform is passive. Remote field performance testing of remote sensing loads during operation.

Note: Refer to Appendix A for the English-Chinese comparison of the names of field test evaluation indicators.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest version (including all amendments) applies to this document.

GB/T 3102.6-1993 Light and related electromagnetic radiation quantity and unit

GB/T 14950-2009 Photogrammetry and Remote Sensing Terminology

GB/T 17444-2013 Infrared focal plane array parameter test method

GB/T 36299-2018 Optical remote sensing radiation transmission basic terms

3 Terms and Definitions

GB/T 3102.6-1993, GB/T 14950-2009, GB/T 17444-2013, GB/T 36299-2018 as defined and The column terms and definitions apply to this document.