GB/T 17304-2009Specification for CAD general technology (English PDF)
CAD通用技术规范
This is a limited preview
Buy now to download the full PDF (21 pages)
Need quotation for your management?
Get a formal quotation for GB/T 17304-2009 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
May 6, 2009
Implementation date
November 1, 2009
Scope
GB/T 17304-2009 is the English-translated version of CAD通用技术规范.
GB/T 17304-2009 is the Chinese standard "Specification for CAD general technology". Its scope clause reads: This standard provides standardized content CAD common technology and common standards of CAD technology should be used.
This standard applies to CAD software development, product design and application of CAD technology CAD conformance testing, but also for other relevant areas Domain reference. Its clauses include terms, definitions and abbreviations; overview.
Found what you need?
Document preview — GB/T 17304-2009
National Standard of the People's Republic of China
- ICS
- 35.240.50
- Classification
- L 67
- Replacing
- GB/T 17304-1998
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms, Definitions and Abbreviations
- 3.1 Terms and definitions
- 3.2 Abbreviations
- 5 CAD software development
- 5.1 computer graphics systems standard
- 5.2 CAD Technical Drawing Standard
- 5.3 Product technical standards for data
- 5.4 CAD file management and archiving standard
- 5.5 Other standard
- 5.6 Related Standards
- 6 CAD Technology
- 6.1 CAD Technical Drawing Standard
- 6.2 Product technical standards for data
- 6.3 CAD electronic documents and archiving standards
- 6.4 Other criteria
- 6.5 Related Standards
- 7 Conformance Testing
- 7.1 The basic principles and methods Standard
- 7.2 CAD Technical Drawing Standard
- 7.3 Product technical standards for data
- 7.4 CAD Chinese system standard
- 7.5 CAD file storage system standard
- 7.6 computer graphics system standard
- Appendix A (Informative Appendix) CAD universal standard framework
- Appendix B (Informative Appendix) CAD General Standard Listing
- Annex C (informative) standardization trends CAD
- References
1 Scope
This standard provides standardized content CAD common technology and common standards of CAD technology should be used.
This standard applies to CAD software development, product design and application of CAD technology CAD conformance testing, but also for other relevant areas
Domain reference.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 13016 standard system preparation principles and requirements
3 Terms, definitions and abbreviations
3.1 Terms and Definitions
The following terms and definitions apply to this standard.
3.1.1
Test test product treated in accordance with the specific features of the standard set forth in order to determine the degree of consistency of the product as the consistency of implementation.
3.1.2
Data sets and programs are identified, it can generate a set of parts information.
3.1.3
In the formal description of product data technology and data products on the exchange of information.
Note. The "Product data representation and exchange" is the official name of ISO 10303. Correspondingly, our standard number is GB/T 16656. The standard has a
Widely used but unofficial name. product model data exchange standards StandardfortheExchangeofProductModelData (STEP)
3.2 Acronyms
The following abbreviations apply to this standard.
CAD. Computer Aided Design ComputerAidedDesign
CAx. Computer Aided Test Tool ComputerAidedTools
PLIB. Library PartsLibrary
STEP. product model data exchange standards StandardfortheExchangeofProductModelData
4 Overview
This standard consists of three parts, namely the development of CAD software, CAD and CAD technology application compliance testing. For ease of explanation, rationale
Solutions, references, and the use of this standard, the above various parts of the standard adopted a unified narrative, consists of the following components.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 21 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of GB/T 17304
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 17304-2009 | Specification for CAD general technology | current edition | Current |
| GB/T 17304-1998 | Specification for CAD general technology | previous edition | Superseded |
This page sells the current edition, GB/T 17304-2009. Earlier editions are listed for reference only.
How to Download GB/T 17304-2009
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 17304-2009
$375.00