GB/T 16155-2018Test method for performance of civil water heating coal stove (English PDF)
民用水暖煤炉性能试验方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 16155-2018 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
February 6, 2018
Implementation date
September 1, 2018
Scope
GB/T 16155-2018 is the English-translated version of 民用水暖煤炉性能试验方法.
GB/T 16155-2018 sets out how to test domestic water heating coal stoves for thermal performance and air pollutant emissions.
It covers stoves burning clean coal such as briquettes and washed coal, with a rated heat supply below 50 kW, working at normal pressure, with a height of no more than 10 m and an outlet water temperature not above 85 °C; stoves that also cook can follow it by reference.
It lists the test equipment, from buckets, scales and mercury thermometers to anemometers, soot testers, flue gas analysers and evaporation pans sized by fire intensity, and the preparation for the test.
Compared with the earlier edition it simplifies the cooking intensity test and adds emission detection. It replaces GB/T 16155-2005, was issued on 6 February 2018 and has applied since 1 September 2018.
Found what you need?
Document preview — GB/T 16155-2018
National Standard of the People's Republic of China
- ICS
- 97.040.20
- Classification
- Y 71
- Replacing
- GB/T 16155-2005
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Test equipment and preparation
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard replaces GB 16155-2005 "The test method for the thermal performance of civil water heating coal stoves." This standard is compared with GB 16155-2005.
In addition to editorial changes, the main technical changes are as follows.
--- Simplified trial methods for cooking intensity (see Chapter 5, 2005 edition of Appendix A);
--- Added "Air Pollutant Emission Detection" (see Chapter 6).
1 Scope
This standard specifies the thermal performance of coal-fired heating coal furnaces and air pollutant emission detection methods.
This standard applies to clean coals such as coal briquettes, washing coal, and other fuels. The rated heat supply is less than 50 kW, and the rated working pressure is normal pressure.
Coal water heaters with a height of no more than 10m and an outlet water temperature not higher than 85°C. The civil heating coal stove with cooking function can be implemented by reference.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest version (including all amendments) applies to this document.
GB/T 16157 Determination of particulate matter in exhaust gas from stationary sources and sampling methods for gaseous pollutants
HJ/T 57 Determination of Sulfur Dioxide in Fixed Source Exhaust Gases by Constant Potential Electrolysis
HJ/T 398 Determination of smoke emitted from fixed source emissions
HJ629 Non-dispersive infrared absorption method for the determination of sulphur dioxide from fixed sources of exhaust gas
HJ692 Non-dispersive infrared absorption method for the determination of exhaust nitrogen oxides from fixed sources
HJ693 Determination of nitrogen oxides from fixed source exhaust gas by constant potential electrolysis
Determination of carbon monoxide in HT/T 44 fixed source exhaust gas Non-dispersive infrared absorption method
3 Test equipment and preparation
3.1 Test Equipment
The test equipment is as follows.
a) 2 buckets, capacity 0.01m³;
b) One Taiwan scale, measuring range 0kg~10kg, sense capacity 0.005kg;
c) One clock, the difference is less than 1min;
d) Two mercury thermometers, measuring range 0 °C ~ 100 °C, dividing value 0.2 °C;
e) One anemometer, measuring range 0m/s~10m/s, accuracy 0.5m/s;
f) 1 soot (gas) tester;
g) 1 flue gas analyzer;
h) One evaporation pan. The initial pot water volume Gc1 and the evaporation pot diameter are determined according to the fire intensity of the cooking stove, as shown in Table 1.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of GB/T 16155
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 16155-2018 | Test method for performance of civil water heating coal stove | current edition | Current |
| GB/T 16155-2005 | Test method for performance of civil water heating coal stove | previous edition | Superseded |
This page sells the current edition, GB/T 16155-2018. Earlier editions are listed for reference only.
How to Download GB/T 16155-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 16157-1996 — Determination of particulates and sampling methods of gaseous pollutants emitted from exhaust gas of stationary source
HJ/T 398-2007 — Stationary source emission - Determination of blackness of smoke plumes - Ringelmann smoke chart
GB/T 7251.4-2026 — Low-voltage switchgear and controlgear assemblies - Part 4: Particular requirements for assemblies for construction sites (ACS)
Secure payment via Stripe
Payments accepted
GB/T 16155-2018
$125.00