GB/T 14712-2009Single-opening hot press (English PDF)

1 Scope

This standard specifies the main parameters of a single layer hot press, requirements, testing and marking, packaging and storage.

This standard applies to the production of particleboard, fiberboard and other single layer hot press (hereinafter referred to as hot press).

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent

Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research

Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.

GB/T 191 Packaging - Pictorial signs (GB/T 191-2008, ISO 780.1997, MOD)

GB/T 1184 shape and position tolerances without individual tolerance value (GB/T 1184-1996, eqvISO 2768-2. 1989)

GB/T 3766 Hydraulic System General technical conditions (GB/T 3766-2001, eqvISO 4413.1998)

GB/T 4879 rust-proof packaging

GB 5226.1 Safety of machinery electrical equipment Part 1. General requirements (GB 5226.1-2002, IEC 60204-

1.2000, IDT)

GB/T 7932 pneumatic systems General technical conditions (GB/T 7932-2003, ISO 4414.1998, IDT)

GB/T 13306 signs

GB/T 13384 mechanical and electrical products packaging General technical conditions

GB/T 18262 General technical panel machinery

GB/T 18514 General Panel Machinery Safety

3 schematic

Pressing machine structure diagram shown in Figure 1.

1 --- plunger barrel;

2 --- Activities beam;

3 --- on the hot plate;

4 --- under the hot plate;

5 --- fixed beam;

6 --- thickness gauge;

7 --- rack.

Note. This chart is not limited by the specific structure of the pressing machine.

Figure 1 pressing machine structure diagram […]