GB/T 1448-2005Fiber-reinforced plastics composites-Determination of compressive properties (English PDF)

3 Terms and definitions

4 Principle of the test

5 Test specimens

6 Test equipment

7 Test conditions

8 Test procedure

9 Calculation

10 Test results

11 Test report

Foreword

This document was issued on 18 May 2005 by the State Administration for Market Regulation and the Standardization Administration of the People's Republic of China, and has been in force since 1 December 2005.

It replaces GB/T 1448-1983.

Classification: ICS 83.120, CCS Q23.

About this edition

GB/T 1448-2005 is the current edition. It was issued on 18 May 2005 and has been in force since 1 December 2005, replacing GB/T 1448-1983.

GB/T 1448-1983 has been superseded: a specification that still cites it is citing a withdrawn edition.

The interval between issue and effect is the transition period. It exists so that producers, laboratories and buyers can requalify products, revise procedures and use up documentation before the new text becomes the one that applies. The date on this page is the official one from the record of the Standardization Administration.

Classification and status

GB/T 1448-2005 is classified under ICS 83.120, in the field of rubber and plastics industries. ICS is the International Classification for Standards, the same scheme used by ISO and by the national bodies of most countries, which is what allows a Chinese standard to be placed beside its foreign counterparts on subject rather than on number.

Its Chinese Standard Classification code is CCS Q23. CCS is the domestic scheme, a letter for the sector and two digits for the subject within it, and it is the code by which the standard is filed and searched in China.

The GB/T prefix marks a recommended national standard. It is not, in itself, law: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it. In practice that covers most of the cases in which it will be read — a purchase specification, an inspection agreement or a certification scheme.