GB/T 14384-2010Woodworking machines - General specifications (English PDF)

Foreword

This standard is GB/T 14384-1993 "Woodworking machines - General technical conditions" amendments. This standard and GB/T 14384-1993 There are differences compared to.

--- Increasing the foreword;

--- Standard structure has been adjusted, canceled a standard Chapter 4, "manufacturing quality," and Chapter 5, "the appearance of quality" technical these two chapters The standard technique is incorporated in Chapter 3. Chapter 3, the title will be changed to "technical requirements." Chapter 6 of the original standard instead of this standard Chapter 4, the original title of "acceptance testing methods" to "inspection and acceptance";

--- Standard part of the text of the original editorial changes were made;

--- Delete the original standard 6.7.6;

--- Increase the informative Appendix A "Determination of dust concentration of woodworking machines";

--- This standard replaces GB/T 14384-1993.

Appendix A of this standard is an informative annex.

1 Scope

This standard specifies the woodworking machines (hereinafter referred to as machine tools) basic requirements for the design, manufacture and acceptance.

This standard applies to all types of woodworking machines.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.

GB/T 3766-2001 Hydraulic System General technical conditions (eqv, ISO 4413:1998)

GB 5226.1-2008 Safety of machinery electrical equipment Part 1: General requirements (IEC 60204-1:2005, IDT)

GB/T 6576-2002 machine lubrication system (eqv, ISO 5170:1977)

GB/T 7932-2003 Pneumatic system General technical conditions (ISO 4414:1998, IDT)

GB/T 10961 Woodworking machines - Symbols

GB/T 11357-2008 pulley material, surface roughness and balance F

GB/T 12448 Woodworking Machine Model Methodology

GB 12557-2010 Safety of woodworking machines General

GB/T 13306 signs

JB/T 4171-1999 General woodworking machine accuracy test

JB/T 8356.1 Technical Conditions Packaging Machine

Preparation of JB/T 9875 Metal Cutting Machine random technical documents

3 Technical requirements