JB/T 3176.2-2014Table Band Sawing Machines - Part 2: Technical Requirements (English PDF)
细木工带锯机 第2部分：技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 3176.2-2014 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
July 9, 2014
Implementation date
November 1, 2014
Scope
JB/T 3176.2-2014 is the English-translated version of 细木工带锯机 第2部分：技术条件.
JB/T 3176.2-2014 is the Chinese machinery industry standard (recommended) giving the technical requirements for table band sawing machines used in fine woodworking.
Its provisions run from general requirements, parameters and dimensions through performance, accessories and tools, health and safety and manufacturing quality, then on to the dry-run test, the load test, the accuracy inspection and the inspection rules.
It is Part 2 of the JB/T 3176 series and is used with Part 1, JB/T 3176.1-2010. Among the documents it quotes are GB/T 11357-2008, GB 12557-2010, GB/T 13568-2008, GB/T 9239.1-2006 and JB/T 9953-1999.
It takes over from JB/T 6552-1993. Issued on 9 July 2014, it has applied since 1 November 2014.
Found what you need?
Document preview — JB/T 3176.2-2014
National Standard of the People's Republic of China
- ICS
- 79.120.10
- Replacing
- JB/T 6552-1993
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Related standards
- Classification and status
1 Foreword
JB/T 3176.2-2014 was issued by MIIT on 9 July 2014 and has been in force since 1 November 2014.
It is one of 3 parts of the JB/T 3176 series.
2 Scope
This standard is the Chinese machinery industry standard (recommended) giving the technical requirements for table band sawing machines used in fine woodworking. Its provisions run from general requirements, parameters and dimensions through performance, accessories and tools, health and safety and manufacturing quality, then on to the dry-run test, the load test, the accuracy inspection and the inspection rules. It is Part 2 of the JB/T 3176 series and is used with Part 1, JB/T 3176.1-2010. Among the documents it quotes are GB/T 11357-2008, GB 12557-2010, GB/T 13568-2008, GB/T 9239.1-2006 and JB/T 9953-1999. It takes over from JB/T 6552-1993.
3 Normative references
JB/T 3176.2-2014 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 11357-2008
GB 12557-2010
GB/T 13568-2008
GB/T 14384-2010 — Woodworking machines - General specifications
GB/T 25373-2010 — Metal-cutting machine tools - General specifications of assembling
GB/T 25374-2010 — Metal-cutting machine tools - Measuring method of cleanliness
GB/T 25376-2010 — Metal-cutting machine tools - General specifications of machining parts
JB/T 3176.1-2010 — Table band sawing machines - Part 1: Parameters
JB 5721-1991 — Joinery band saws - Structural safety
JB/T 9953-1999 — Woodworking machine tools - Measurement method for sound pressure level
GB/T 9239.1-2006 — Mechanical vibration -- Balance quality requirements for rotors in a constant (rigid) state -- Part 1: Specification and verification of balance tolerances
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Related standards
Other parts of this standard:
JB/T 3176-1993 — Joinery band saws - Parameters
JB/T 3176.1-2010 — Table band sawing machines - Part 1: Parameters
6 Classification and status
International classification (ICS): 79.120.10
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 11357-2008Quality, roughness and balance of transmission pulleys
- GB 12557-2010Woodworking machines - Safety technical specification
- GB/T 13568-2008Table band sawing machines - Vocabulary and accuracy
- GB/T 14384-2010Woodworking machines - General specifications
- GB/T 25373-2010Metal-cutting machine tools - General specifications of assembling
- GB/T 25374-2010Metal-cutting machine tools - Measuring method of cleanliness
Similar standards
Editions of JB/T 3176.2
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 3176.2-2014 | Table Band Sawing Machines - Part 2: Technical Requirements | current edition | Current |
| JB/T 6552-1993 | Table Band Sawing Machines - Part 2: Technical Requirements | previous edition | Superseded |
This page sells the current edition, JB/T 3176.2-2014. Earlier editions are listed for reference only.
How to Download JB/T 3176.2-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 14384-2010 — Woodworking machines - General specifications
GB/T 25373-2010 — Metal-cutting machine tools - General specifications of assembling
GB/T 25374-2010 — Metal-cutting machine tools - Measuring method of cleanliness
Secure payment via Stripe
Payments accepted
JB/T 3176.2-2014
$149.00