GB/T 14260-2010General rules for sampling and sample preparation of heavy nonferrous metals flotation concentrates in bulk (English PDF)
散装重有色金属浮选精矿取样、制样通则
This is a limited preview
Buy now to download the full PDF (17 pages)
Need quotation for your management?
Get a formal quotation for GB/T 14260-2010 in 30 minutes.
Issued by
Standardization Administration of China
Level / Type
National · Recommended
Issue date
December 23, 2010
Implementation date
September 1, 2011
Scope
GB/T 14260-2010 is the English-translated version of 散装重有色金属浮选精矿取样、制样通则.
GB/T 14260-2010 — This standard specifies the bulk of heavy nonferrous metals flotation concentrates sampling and sample preparation procedures and moisture measurement method and general principles.
Providing goods Fluctuations in quality, precision, error checking and sampling systems Experimental methods for checking the sample. This standard applies to heavy nonferrous metals flotation concentrates in bulk chemical composition, moisture and other physical testing items taken and prepared sample.
Found what you need?
Document preview — GB/T 14260-2010
National Standard of the People's Republic of China
- ICS
- 77.120.01
- Classification
- D 42
- Replacing
- GB/T 14260-1993
Issued by: Standardization Administration of China
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard is the international standard ISO 12743:2006 "Copper, lead, zinc and nickel concentrates - Determination of metal and moisture content of the sampling method" (in English Version) non-equivalent, the main differences are as follows.
--- Of terms, definitions and provisions of the content of expression by Chinese customs have been modified;
--- Of sampling methods according to our conditions are summarized and classification;
--- Deleted extraction, sample preparation equipment and methods are not suitable for our country;
--- Increasing the sample combinations and sample preparation process;
--- Increased moisture determination method;
--- Added Appendix A "concentrate quality fluctuation test" Appendix B "test methods for checking the precision" and Appendix C "sampling system error Poor verification method. " this standard replaces GB/T 14260-1993 "heavy nonferrous metals flotation concentrates in bulk sampling and sample preparation General." this standard and GB/T 14260-1993 compared to the main changes are as follows.
--- Sampling system into the clear light of international standards and quality system sampling time sampling systems;
--- Van sampling method increases the sampling methods concentrate on delivery of the car;
--- Increasing the sampling methods bagged concentrate;
--- For the determination of water balance precision equipment and the initial drying temperature has been modified;
--- Concentrate on Appendix B for checking the precision test data analysis, the deleted step to do R control charts to simplify the process.
--- Terminology, definitions and presentation of the contents of the provisions made several editorial changes.
The Standard Appendix A, Appendix B and Appendix C are normative appendix.
The standard proposed by China Nonferrous Metals Industry Association.
This standard by the national non-ferrous metals Standardization Technical Committee (SAC/TC243) centralized.
1 Scope
This standard specifies the bulk of heavy nonferrous metals flotation concentrates sampling and sample preparation procedures and moisture measurement method and general principles. Providing goods Fluctuations in quality, precision, error checking and sampling systems Experimental methods for checking the sample.
This standard applies to heavy nonferrous metals flotation concentrates in bulk chemical composition, moisture and other physical testing items taken and prepared sample.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 8170 repair value expressed about the rules and limit values \u200b\u200band judgment GB/T 14261 bulk flotation zinc concentrates sampling and sample preparation method GB/T 14262 flotation lead concentrates in bulk sampling and sample preparation method GB/T 14263 bulk flotation of copper concentrate sampling, sample preparation method GB/T 25952 bulk flotation of nickel concentrate sampling and sample preparation method
3 Terms and Definitions
This standard is determined by the terms and definitions apply to this standard and related standards GB/T 14261 ~ GB/T 14263, GB/T 25952.
Inspection Lot lotsample to determine the grade and designated sampling unit.
Consignment diliverylot A certain number of deliveries of the same specification concentrate. It may be composed of one or more inspection lot.
Deputy grant sub-lot the inspection lot is divided into several parts, each part being a deputy batch.
Basic batch basiclot Take the minimum quality standard sample preparation specified in a number of concentrate.
Like sample parts
A one-time action to achieve a certain quality of ore samples from the inspection lot or sub-lot.
Subsample
By two or more parts like the composition of the sample.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 8170Rules of rounding off for numerical values & expression and judgement of limiting values
- GB/T 14261Methods for sampling and sample preparation of flotation zinc concentrates in bulk
- GB/T 14262Methods for sampling and sample preparation of flotation lead concentrates in bulk
- GB/T 14263Methods for sampling and sample preparation of flotation copper concentrates in bulk
- GB/T 25952Methods for sampling and sample preperation of flotation nickel conentrates in bulk
Cited by
- GB/T 46596-2025Copper, lead, zinc and nickel concentrates - Sampling of slurries
- GB/T 1819.1-2022Methods for chemical analysis of tin concentrates—Part 1: Determination of moisture content—Heat drying method
- GB/T 13449-2021Method for sampling and sample preparation of gold lump ores
- YS/T 441.2-2014Management rules of nonferrous metals balance. Part 2: Lead enrichment and metallurgy
- YS/T 441.3-2014Management rules of nonferrous metals balance. Part 3: Zinc enrichment and metallurgy
- YS/T 441.4-2014Management rules of nonferrous metals balance. Part 4: Tin enrichment and metallurgy
How to Download GB/T 14260-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 14261-2010 — Methods for sampling and sample preparation of flotation zinc concentrates in bulk
GB/T 14262-2010 — Methods for sampling and sample preparation of flotation lead concentrates in bulk
GB/T 14263-2010 — Methods for sampling and sample preparation of flotation copper concentrates in bulk
Secure payment via Stripe
Payments accepted
GB/T 14260-2010
$425.00