GB/T 25952-2010Methods for sampling and sample preperation of flotation nickel conentrates in bulk (English PDF)
散装浮选镍精矿取样、制样方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 25952-2010 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 23, 2010
Implementation date
September 1, 2011
Scope
GB/T 25952-2010 is the English-translated version of 散装浮选镍精矿取样、制样方法.
GB/T 25952-2010 is the Chinese standard "Methods for sampling and sample preperation of flotation nickel conentrates in bulk". Its scope clause reads: This standard specifies the procedures and methods of bulk flotation of nickel concentrate sampling, sample preparation and determination of moisture.
This standard applies to bulk flotation of nickel concentrate chemical composition, moisture and other physical items detected by sampling the sample, sample preparation and determination of moisture content. Its clauses include terms and definitions; requirements.
Found what you need?
Document preview — GB/T 25952-2010
National Standard of the People's Republic of China
- ICS
- 77.120.01
- Classification
- D 42
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Requirements
1 Scope
This standard specifies the procedures and methods of bulk flotation of nickel concentrate sampling, sample preparation and determination of moisture.
This standard applies to bulk flotation of nickel concentrate chemical composition, moisture and other physical items detected by sampling the sample, sample preparation and determination of moisture content.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 8170 repair value expressed about the rules and limit values and judgment
GB/T 14260-2010 heavy nonferrous metals flotation concentrates in bulk sampling and sample preparation General
3 Terms and Definitions
This standard adopts GB/T 14260 terminology and definitions.
4 Requirements
4.1
different test batches of samples, sample preparation and determination of the overall accuracy (betaSPM) and sampling precision (betaS) as shown in Table 1.
Table 1 Minimum number of samples in different parts of the inspection lot shall be taken of nickel concentrate
Test batch N/t
Quality variation type small Medium Large
sigmaw < 0.3 0.3<=sigmaw < 0.6 sigmaw>=0.6
betaSPM /% betaS /%
<=60 6 18 28 0.300 0.287
> 60 to 240,123,656 0.193 0.173
> 240 to 600,205,890 0.159 0.134
NOTE. If the inspection lot quality fluctuation is too large, when less than the required accuracy, according to the formula n = 2sigmaw
beta () S to calculate the number of increments.
4.2
Standard 5.5.1 sampling system is no system deviation method.
4.3
standard nickel content (mass fraction) as the quality characteristics of nickel concentrate.
4.4
according to the method specified in this standard sampling and sample preparation, for quality fluctuation test for checking the precision required.
Consultation greater than 600t more than 4.5 consignment inspection lot.
4.6
In case of conditions, sampling methods can be used outside of this standard. Subject to sampling error checking test, no significant difference after confirmation,
Before use.
4.7
composition sample of not less than 3 months (international trade for 6 months), for verification, contract or otherwise agreed shelf life.
4.8
Sampling and sample preparation used equipment, tools and sample containers must be filled kept clean, dry, and durable. Sheng sample container should be better seal, preventing
GB/T 15923-2010 | GB/T 8152.1-2006 | GB/T 8152.10-2006 | GB/T 46596-2025 | GB/Z 39124-2020 | GB/T 30082-2013 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Cited by
- SN/T 4501.2-2017Chemical analysis of nickel concentrate. Part 2: Determination of gallium��germanium��selenium��cadmium��indium��tellurium��lanthanum��thallium. Inductively coupled plasma mass spectrometry method
- SN/T 4501.3-2017Chemical analysis of nickel concentrate. Part 3: Determination of gold��platinum��palladium. Inductively coupled plasma mass spectrometry method
- YS/T 340-2014Nickel concentrate
- GB/T 14260-2010General rules for sampling and sample preparation of heavy nonferrous metals flotation concentrates in bulk
Similar standards
How to Download GB/T 25952-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 25952-2010
$225.00