GB/T 13922.1-1992Performance test for water treatment equipment (English PDF)
This is a limited preview
Buy now to download the full PDF (23 pages)
Need quotation for your management?
Get a formal quotation for GB/T 13922.1-1992 in 30 minutes.
Issued by
Standardization Administration of China
Level / Type
National · Recommended
Issue date
December 30, 2011
Implementation date
June 1, 2012
Scope
GB/T 13922.1-1992 (Performance test for water treatment equipment) is available as an English-translated PDF.
GB/T 13922.1-1992 — This standard specifies the requirements for equipment, filtration equipment, water treatment equipment and other thermal oxygen ion-exchange performance test, measurement and test the inspection report.
This standard applies to the above-described water treatment equipment product qualification test, after new installation or after transformation with equipment testing and commissioning when the performance test, performance test also applies to the use of economic assessment carried out in a water treatment device.
Found what you need?
Document preview — GB/T 13922.1-1992
National Standard of the People's Republic of China
- ICS
- 27.060.01
- Classification
- J 98
- Replacing
- GB/T 13922.1-1992; GB/T 13922.2-1992; GB/T 13922.3-1992; GB/T 13922.4-1992
Issued by: Standardization Administration of China
Contents
- Preface
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 General
- 5 5 ion exchange equipment Performance Test
- 6 Filter performance test equipment
- 7 Thermal deaerator Performance Test
- Appendix A (informative) water, saturated water and saturated steam enthalpy
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard replaces GB/T 13922.1-1992 "General Performance Test water treatment equipment", GB/T 13922.2-1992 "Water is provided Preparation of the ion exchange performance test equipment ", GB/T 13922.3-1992" water treatment equipment filter performance test equipment ", GB/T 13922.4-1992 "water treatment equipment performance test deaerator." this standard GB/T 13922.1-1992, GB/T 13922.2-1992, GB/T 13922.3-1992, GB/T 13922.4-1992 were integrated, compared with the 1992 version, the main changes are as follows.
--- Additions and modifications to some normative references;
--- Additions and modifications to the terms and definitions;
--- Chemical modification of some measure;
--- Increased device performance test by the ion exchange "test conditions";
--- Increase in device performance test by the ion-exchange in the exchange capacity, regenerant consumption, water consumption from renewable rate, in addition to carbon is carbon removal efficiency Determination of rate requests and calculation formulas;
--- Filtration equipment test subjects increased efficiency fiber filters and iron removal filtration equipment;
--- Increased backwash filtration equipment measuring intensity;
--- Oxygen equipment test objects defined as thermal deaerator;
--- DO direct reference measurement method GB/T 12157, remove the GB/T 13922.4-1992 in Chapters 6 and 7 of content;
--- Oxygen equipment test requirements specified in a variety of hydrophobic not participating in the trial, simplifying the deaerator heat and fluid performance measurement and meter Calculation formula.
This standard by the National Standardization Technical Committee of the boiler pressure vessel (SAC/TC262) and focal points.
1 Scope
This standard specifies the requirements for equipment, filtration equipment, water treatment equipment and other thermal oxygen ion-exchange performance test, measurement and test the inspection report.
This standard applies to the above-described water treatment equipment product qualification test, after new installation or after transformation with equipment testing and commissioning when the performance test, performance test also applies to the use of economic assessment carried out in a water treatment device.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.
GB 209 hydroxide for industrial use GB 320 industrial synthetic hydrochloric acid GB/T 534 industrial sulfuric acid GB/T 1226 General Pressure Gauge GB/T 1227 Precision pressure gauge GB/T 1576-2008 industrial boiler water quality GB/T 5462 industrial salt Resin Determination for water GB/T 5757 ion exchange Determination of the resin particle size, effective size and uniformity coefficient of GB/T 5758 ion exchange Resin Determination for water GB/T 5759 OH anion exchange Determination of exchange capacity of the resin GB/T 5760 OH anion exchange Determination of GB/T 6904 Industrial circulating cooling water and boiler water of pH GB/T 6907 boiler water and cooling water analysis water sample collection methods Determination of GB/T 6908 boiler water and cooling water conductivity analysis method Determination of GB/T 6909 boiler water and cooling water hardness Analysis GB/T 8144 Determination of cation exchange capacity of the resin exchange Determination of true density GB/T 8330 wet ion exchange resin Resins in wet density determination method GB/T 8331 ion exchange Resin Swelling Determination GB/T 11991 Ion exchange GB/T 11992-chloro-type strongly basic anion exchange resin exchange capacity determination Determination of total silicon GB/T 12148 boiler water and cooling water analysis method of low silicon content transformation hydrofluoric acid GB/T 12149 Determination of industrial circulating cooling water and boiler water in silicon GB/T 12151 Determination of boiler water and cooling water turbidity analysis method (Foma hydrazine turbidity) Determination of GB/T 12152 boiler water and cooling water and oil content GB/T 12157 Determination of industrial circulating cooling water and boiler water of dissolved oxygen GB/T 12598 ion exchange resin infiltration ball mill rate, measured after grinding ball rate GB/T 13689 Determination of industrial circulating cooling water and boiler water Copper
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 23 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 209[GB/T 209-2006] Sodium hydroxide for industrial use
- GB 320Synthetic hydrochloric acid for industrial use
- GB/T 534Sulphuric acid for industrial use
- GB/T 1226General pressure gauge
- GB/T 1227Accurate pressure gauge
- GB/T 1576-2008Water quality for industrial boilers
GB/T 5759 · GB/T 12148
Cited by
- HJ 2528-2012Technical requirement for environmental protection products. Hollow fiber membrane bio-reactor unit
- HG/T 4084-2009Fully automatic water purification units with enhanced flocculation and sedimentation
- HG/T 4085-2009Pressure fiber bundle filters
- HG/T 4111-2009Fully automatic continuous microfiltration/ultrafiltration water purification equipment
- HG/T 3134-2007Fluidized bed ion exchange water treatment equipment - Technical specifications
How to Download GB/T 13922.1-1992
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 209-2006 — [GB/T 209-2006] Sodium hydroxide for industrial use
GB 20904-2007 — Horizontal directional drilling - Safety operation rules
GB 20905-2025 — Foundry machinery - Safety requirements
Secure payment via Stripe
Payments accepted
GB/T 13922.1-1992
$405.00