GB/T 11375-1999Metallic and other inorganic coatings--Thermal spraying--Safe practices (English PDF)
金属和其他无机覆盖层 热喷涂 操作安全
This is a limited preview
Buy now to download the full PDF (13 pages)
Need quotation for your management?
Get a formal quotation for GB/T 11375-1999 in 30 minutes.
Issued by
State Administration of Quality and Technical Supervision
Level / Type
National · Recommended
Issue date
August 10, 1999
Implementation date
March 1, 2000
Scope
GB/T 11375-1999 is the English-translated version of 金属和其他无机覆盖层 热喷涂 操作安全.
GB/T 11375-1999 is the Chinese national standard on metallic and other inorganic coatings--thermal spraying--safe practices, in the field of manufacturing engineering.
The /T suffix marks it as a recommended standard: it is not compulsory by itself, but it becomes binding as soon as a contract, a tender or a customer specification calls it up — which in practice is how most foreign buyers meet it.
It was issued on 10 August 1999 by the State Administration of Quality and Technical Supervision, and has been in force since 1 March 2000. Classification: ICS 25.220.20, CCS A29.
This page is published from the official record of the standard held by the Chinese standards administration: the identification, the dates, the classification and the issuing body are taken from there.
The clause text, the tables and the numeric limits are in the document itself, which is delivered complete in English translation.
Found what you need?
Document preview — GB/T 11375-1999
National Standard of the People's Republic of China
- ICS
- 25.220.20
- Classification
- A29
Issued by: State Administration of Quality and Technical Supervision
Contents
- Foreword
- 0 Introduction
- 1 Scope
- 2 Referenced standards
- 3 Definitions
- 4 Prevention, management and supervision
- 5 Safe operation of the thermal spraying equipment
- 6 Fire prevention
- 7 Personal safety
- 8 Protective ventilation
- 9 Toxic substances
- Annex A (normative) Warning labels for thermal spraying
- Annex B (normative) Filter lenses for thermal spraying operations
- Annex C (normative) Threshold limit values of the air hygiene standard for thermal spraying workshops
- Annex D (informative) Fire extinguishing in thermal spraying operations
3 Definitions
4 Prevention, management and supervision
5 Safe operation of the thermal spraying equipment
6 Fire prevention
7 Personal safety
8 Protective ventilation
9 Toxic substances
Foreword
This document was issued on 10 August 1999 by the State Administration of Quality and Technical Supervision, and has been in force since 1 March 2000.
It replaces GB 11375-1989.
Classification: ICS 25.220.20, CCS A29.
About this edition
GB/T 11375-1999 is the current edition. It was issued on 10 August 1999 and has been in force since 1 March 2000, replacing GB 11375-1989.
GB 11375-1989 has been superseded: a specification that still cites it is citing a withdrawn edition.
The interval between issue and effect is the transition period. It exists so that producers, laboratories and buyers can requalify products, revise procedures and use up documentation before the new text becomes the one that applies. The date on this page is the official one from the record of the Standardization Administration.
Classification and status
GB/T 11375-1999 is classified under ICS 25.220.20, in the field of manufacturing engineering. ICS is the International Classification for Standards, the same scheme used by ISO and by the national bodies of most countries, which is what allows a Chinese standard to be placed beside its foreign counterparts on subject rather than on number.
Its Chinese Standard Classification code is CCS A29. CCS is the domestic scheme, a letter for the sector and two digits for the subject within it, and it is the code by which the standard is filed and searched in China.
The GB/T prefix marks a recommended national standard. It is not, in itself, law: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it. In practice that covers most of the cases in which it will be read — a purchase specification, an inspection agreement or a certification scheme.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 13 pages — is available in the English PDF.
Referenced standards
Cited by
- GB/T 45858-2025Additive manufacturing — Specification for process of cold spray
- GB/T 44025-2024Remanufacturing - Technical specification for plasma spraying
- NB/T 10522.1-2021Automatic waterproof door for mining - Part 1: Mechanical devices
- CECS 343-2013Technical specification for painting and anticorrosion of steel structures
Similar standards
Editions of GB/T 11375
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 11375-1999 | Metallic and other inorganic coatings--Thermal spraying--Safe practices | current edition | Current |
| GB 11375-1989 | Safety for thermal spraying operation | merged into this edition | Superseded |
This page sells the current edition, GB/T 11375-1999. Earlier editions are listed for reference only.
How to Download GB/T 11375-1999
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 11375-1999
$240.00