GB/T 10516-2012Determination of average crushing strength for nitrophosphate (English PDF)
硝酸磷肥颗粒平均抗压碎力的测定
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 10516-2012 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 31, 2012
Implementation date
June 1, 2013
Scope
GB/T 10516-2012 is the English-translated version of 硝酸磷肥颗粒平均抗压碎力的测定.
GB/T 10516-2012 is the Chinese standard "Determination of average crushing strength for nitrophosphate". Its scope clause reads: This standard specifies the method for determination of particulate nitrate fertilizer, P and K nitrate particles having an average crush strength.
This standard applies to all kinds of technology, the nitrate granular fertilizer, P and K determination of nitrate particles having an average crush strength. Its clauses include instrument; steps; expression analysis.
Found what you need?
Document preview — GB/T 10516-2012
National Standard of the People's Republic of China
- ICS
- 65.080
- Classification
- G 20
- Replacing
- GB/T 10516-1989
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Principle
- 4 Instrument
- 5 Steps
- 6 Expression analysis
Foreword
This standard rule according to GB/T 1.1-2009 given draft.
This standard is one nitrate fertilizer, P and K series of standard test methods for nitrate, which are listed below national standards.
--- GB/T 10511-2008 "After distillation of total nitrogen content for nitrophosphate titration method";
--- GB/T 10512-2008 "nitrate fertilizer phosphorus content - Quinoline phosphomolybdate gravimetric method";
--- GB/T 10513-2012 "nitrophosphate determination of water content Karl Fischer method";
--- GB/T 10514-2012 "nitrophosphate determination of water content - Oven method";
--- GB/T 10515-2012 "Nitrophosphates Determination of particle size."
This standard replaces GB/T 10516-1989 "nitrate fertilizer particles have an average compressive strength determination."
The standard proposed by China Petroleum and Chemical Industry Association.
1 Scope
This standard specifies the method for determination of particulate nitrate fertilizer, P and K nitrate particles having an average crush strength.
This standard applies to all kinds of technology, the nitrate granular fertilizer, P and K determination of nitrate particles having an average crush strength.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated edition applies to this article Member. For undated references. The latest edition (including any amendments) applies to this document.
Determination of GB/T 10515 Nitrophosphates granularity
3 Principle
Select a certain size, the number of particles of phosphorus and potassium nitrate or nitric acid phosphate, measured crush strength of each one nitrophosphate averaged.
4 Instrument
4.1 usually laboratory instruments.
4.2 Crush strength tester. Sensitivity 0.5N.
5 Steps
Take Press GB/T 10515 Determination 2.00mm 2.80mm particle size between the time ~ 30 randomly selected, one by one to determine particle Anti-crushing force.
6 Expression analysis
P and K fertilizer nitrate or nitrate particles having an average crush strength (N), according to equation (1).
Where.
Numerical crush strength of Ni --- each particle, in Newtons (N).
Results reserved to one decimal place.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
Similar standards
Editions of GB/T 10516
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 10516-2012 | Determination of average crushing strength for nitrophosphate | current edition | Current |
| GB/T 10516-1989 | Determination of average crushing strength for nitrophosphate | previous edition | Superseded |
This page sells the current edition, GB/T 10516-2012. Earlier editions are listed for reference only.
How to Download GB/T 10516-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10515-2012 — Determination of particle size for nitrophosphate
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
Secure payment via Stripe
Payments accepted
GB/T 10516-2012
$85.00