GB/T 10504-2017Molecular sieve 3A (English PDF)
3A分子筛
This is a limited preview
Buy now to download the full PDF (17 pages)
Need quotation for your management?
Get a formal quotation for GB/T 10504-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 7, 2017
Implementation date
April 1, 2018
Scope
GB/T 10504-2017 is the English-translated version of 3A分子筛.
GB/T 10504-2017 is the Chinese national product standard for 3A molecular sieve, the potassium-sodium type A molecular sieve with an effective pore diameter of about 3 Å, made from 4A molecular sieve by potassium ion exchange.
It sorts the product into bar-shaped, spherical, spherical for insulating glass and powder types, with technical requirements for each.
The test methods cover appearance, wear rate, bulk density, static and dynamic water adsorption, particle size, crush force, static ethylene and nitrogen adsorption, moisture of the packaged product, water absorption rate, temperature rise, falling powder, gas desorption and potassium exchange rate, followed by inspection rules and packaging, marking, storage and transport.
It applies to products used as industrial desiccants in chemicals, petroleum, natural gas, insulating glass and medicine. It replaces GB/T 10504-2008, was issued on 7 September 2017 and has applied since 1 April 2018.
Found what you need?
Document preview — GB/T 10504-2017
National Standard of the People's Republic of China
- ICS
- 71.100.99
- Classification
- G 85
- Replacing
- GB/T 10504-2008
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 technical requirements
- 4.1 Product Category
- 4.2 strip 3A molecular sieve technical requirements
- 4.3 spherical 3A molecular sieve technical requirements
- 4.4 hollow glass with spherical 3A molecular sieve technology requirements
- 4.5 3A molecular sieve powder technical requirements
- 5 test methods
- 5.1 Appearance
- 5.2 Determination of wear rate
- 5.3 Determination of bulk density
- 5.4 Determination of static water adsorption
- 5.5 Determination of particle size
- 5.6 Determination of crush force
- 5.7 Determination of static ethylene and nitrogen adsorption
- 5.8 Determination of dynamic water adsorption
- 5.9 Determination of moisture content of packaging
- 5.10 Determination of water absorption rate
- 5.11 Determination of temperature rise
- 5.12 Determination of falling powder degree
- 5.13 Determination of gas desorption amount
- 5.14 potassium exchange rate determination potassium tetraphenylborate overlap method
- 5.15 Determination of the amount of sieve
- 6 Inspection rules
- 7 Packaging, Labeling, Storage and Transportation
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard replaces GB/T 10504-2008 "3A molecular sieve", compared with GB/T 10504-2008, the main technical changes are as follows.
--- Improve some of the main technical requirements of the product (see Chapter 4);
--- Modify spherical 3A molecular sieve and hollow glass spherical 3A molecular sieve specifications (see 4.3 and 4.4);
--- Increasing the spherical glass 3A molecular sieve gas desorption amount, powder falling and temperature rise technical requirements (see 4.4);
--- Remove the hollow glass with spherical 3A zeolite wear rate and crushing resistance of the technical requirements (see 4.4);
--- Modify the hollow glass with spherical 3A molecular sieve adsorption of static water test conditions (see 5.4).
1 Scope
This standard specifies the 3A molecular sieve terms and definitions, technical requirements, test methods, inspection rules and packaging, labeling, storage and transportation.
This standard applies to 3A molecular sieve powder, spherical and bar products, the main uses for the chemical, petroleum, natural gas, insulating glass, medicine Industrial desiccants.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this document. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 191-2008 Packaging - Pictorial signs
GB/T 6286 zeolite bulk density determination method
GB/T 6287 molecular sieve static water adsorption determination
GB/T 6288 granular molecular sieve particle size determination method
GB/T 6678-2003 General principles of sampling of chemical products
GB/T 6679-2003 General Principles of Sampling for Solid Chemical Products
GB/T 8170-2008 Representation and determination of rules for repair of numerical values and limit values
GB/T 8770 molecular sieve dynamic water adsorption method
HG/T 2783 zeolite crush resistance test method
HG/T 2843 chemical analysis of fertilizer products commonly used standard titration solution, standard solution, reagent solution and indicator solution
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 3A molecular sieve
Type A molecular sieve crystal structure, the effective pore diameter of about 3 Å potassium sodium type molecular sieve.
Note 1. By 4A molecular sieve after potassium ion exchange process.
Note 2. The crystal structure can be determined by X-ray diffraction.
Note 3. 1 Å = 0.1 nm.
The formula is XK2O · YNa2O · Al2O3 · 2SiO2 · 9/2H2O (XY = 1); Si-Al ratio M(SiO2)/M(Al2O3) ~2.
4 Technical requirements
4.1 Product Classification
According to different uses and appearances, the 3A molecular sieve is divided into four types.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191-2008Graphical symbols marking for handling and storage of packages
- GB/T 6286Determination of bulk density for molecular sieve
- GB/T 6287Determination of static adsorbed water for molecular sieve
- GB/T 6288Determination of particle size for granular molecular sieve
- GB/T 6678-2003General principles for sampling chemical products
- GB/T 6679-2003General rules for sampling solid chemical products
Similar standards
Editions of GB/T 10504
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 10504-2017 | Molecular sieve 3A | current edition | Current |
| GB/T 10504-2008 | Molecular sieve 3A | previous edition | Superseded |
This page sells the current edition, GB/T 10504-2017. Earlier editions are listed for reference only.
How to Download GB/T 10504-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 6286-2021 — Determination of bulk density for molecular sieve
GB/T 6287-2021 — Determination of static adsorbed water for molecular sieve
GB/T 6288-2021 — Determination of particle size for granular molecular sieve
Secure payment via Stripe
Payments accepted
GB/T 10504-2017
$295.00