GB 5606.2-2005Cigarettes-mark (English PDF)

Foreword

GB 5606 "Cigarettes" is divided into six parts. - Part

1 Scope

GB 5606.2-2005 is the Chinese national standard on cigarettes-mark, in the field of agriculture. It carries no /T suffix, which in the Chinese system means compliance is mandatory: a product or a practice within its scope has to meet it to be lawfully made, sold or carried out in China. It was issued on 17 June 2005 by the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China; Standardization Administration of China, and has been in force since 1 January 2006. Classification: ICS 65.160, CCS X87. This page is published from the official record of the standard held by the Chinese standards administration: the identification, the dates, the classification and the issuing body are taken from there. The clause text, the tables and the numeric limits are in the document itself, which is delivered complete in English translation.

This Part of GB 5606 specifies the requirements, test methods, inspection rules for cigarette packaging marks. This Part applies to cigarettes.

2 Normative references

The clauses in the following documents become the clauses of this Part through reference to this Part of

GB 5606.For any referenced document with a date, all subsequent amendments (excluding errata) or revisions are not applicable to this Part. However, parties to an agreement based on this Part are encouraged to study whether the latest versions of these documents can be used. For any referenced document without a date, the latest version shall apply to this Part.

GB/T 5606.1 Cigarettes - Part

3 Terms and definitions

The following terms and definitions apply to this Part.

3.1 Warnings The sentence "Smoking is harmful to health" stipulated in Article 18 of the Tobacco Monopoly Law of the People's Republic of China.

3.2 Mark A general term for various marks on the packaging used to identify the product and its quality, quantity, characteristics, properties, usage methods. The mark can be expressed in words, symbols, numbers, patterns and other forms. regulations.

4.2.6 Implemented standard number and production license number.

4.2.7 Packaging film packaging shall be accompanied by instructions that meet the above requirements.

4.3 Cartons and packets The following information shall be indicated on the cartons and packets. The content indicated on the packaging film carton is determined by the manufacturer.

4.3.1 Trademarks and registered marks.

4.3.2 Enterprise name that complies with 4.1.2.

4.3.3 Number of cigarettes (pcs) and product barcode.

4.3.4 Tar content, expressed as ××mg or ×mg; nicotine content in smoke, expressed as ×.×mg; carbon monoxide content in smoke, expressed as ××mg or ×mg; the marking shall be clearly contrasted with the background color; the height of the Chinese font shall not be less than

4.3.5 A warning shall be indicated; the height of the Chinese warning font shall not be less than

5 Test method

5.1 Take laboratory samples and prepare test samples according to GB/T 5606.1.

5.2 Test according to YC/T 28.1.

6 Inspection rules

6.1 Packaging mark quality defects are divided into two categories. A and B. Among them, those that do not meet any of the requirements of 4.1.1, 4.1.2, 4.1.5, 4.3.4,

4.3.5 are category A quality defects; those that do not meet any of the other requirements are category B quality defects.

6.2 If any category A quality defect occurs, the batch of cigarettes will be judged as unqualified; the packaging mark score will be zero.

6.3 The unit deduction value of category B quality defect items for case, carton, packet is given in Table