CJ/T 441-2013Household sewage treatment plant (English PDF)
This is a limited preview
Buy now to download the full PDF (9 pages)
Need quotation for your management?
Get a formal quotation for CJ/T 441-2013 in 30 minutes.
Issued by
Ministry of Housing and Urban-Rural Development of the People's Republic of China
Level / Type
National · Recommended
Issue date
January 1, 2013
Implementation date
March 1, 2014
Scope
CJ/T 441-2013 (Household sewage treatment plant) is available as an English-translated PDF.
CJ/T 441-2013 - This standard specifies the household sewage treatment plant classification, type, composition, applicable conditions, materials and ancillary equipment, requirements, test side Law, inspection rules, marking, packaging, transportation and storage.
This standard applies to a single set of processing capacity of not more than 2.0m3/d of domestic sewage treatment plant (hereinafter referred to as "installation").
Found what you need?
Document preview — CJ/T 441-2013
National Standard of the People's Republic of China
- ICS
- 91.020
- Classification
- P53
Issued by: Ministry of Housing and Urban-Rural Development of the People's Republic of China
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Classification, model and composition
- 4 Applicable conditions
- 5 Materials and ancillary equipment
- 6 Requirements
- 7 Test Method
- Inspection rules
- 9 Logo, packaging, transportation and storage
- Appendix A (informative) household sewage treatment plant components and size
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard proposed by the Ministry of Housing and Urban Standard and Design Institute.
This standard by the Ministry of Housing and Urban Water Supply and Drainage Standardization Technical Committee building centralized.
1 Scope
This standard specifies the household sewage treatment plant classification, type, composition, applicable conditions, materials and ancillary equipment, requirements, test side Law, inspection rules, marking, packaging, transportation and storage.
This standard applies to a single set of processing capacity of not more than 2.0m3/d of domestic sewage treatment plant (hereinafter referred to as "installation").
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 191 Packaging - Pictorial signs Acoustic environment quality standard GB 3096-2008 GB 4208-2008 enclosure protection (IP code) GB 5084 irrigation water quality standards GB/T 5226.1 Safety of machinery - Electrical machinery and electronic equipment - Part 1. General specifications GB/T 5836.1 building drainage with rigid polyvinyl chloride (PVC-U) pipe GB/T 5836.2 building drainage with rigid polyvinyl chloride (PVC-U) fittings Liquid unsaturated polyester resin for GB/T 8237 fiber reinforced plastics GB/T 9969 Industrial Products Manual General GB/T 13306 signs GB/T 13384 mechanical and electrical product packaging General technical conditions GB/T 13657 bisphenol A epoxy resin GB 14048.1 Low-voltage switchgear and controlgear - Part 1. General GB/T 14048.7 low-voltage switchgear and control equipment - Part 7-1. Auxiliary device copper conductor terminal block GB 14554 Odor pollutant emission standards GB 16297 Integrated Air Pollutants Emission Standard GB 16917.1 household and similar purposes with overcurrent protection residual current operated circuit breaker (RCBO) Part 1. General rule Town sewage treatment plant pollutant discharge standards GB/T 18369 glass fiber rovings GB/T 18370 glass fiber roving cloth GB/T 20207.1 Acrylonitrile Butadiene Styrene (ABS) Pressure Piping Systems - Part 1. Tubing GB/T 20207.2 Acrylonitrile Butadiene Styrene (ABS) Pressure Piping Systems - Part 2. Fittings JB/T 5995 Instructions for use of industrial products Instructions for the preparation of mechanical and electrical products JB8939 water pollution control equipment safety technical specifications
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 9 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB 3096-2008Chinese standard
- GB 5084Standard for irrigation water quality
- GB/T 5226.1Electrical safety of machinery -- Electrical equipment of machines -- Part 1: General requirements
- GB/T 5836.1Unplasticized poly(vinyl chloride) (PVC-U) pipes for soil and waste discharge inside buildings
- GB/T 5836.2Unplasticized poly(vinyl chloride) (PVC-U) fittings for soil and waste discharge inside buildings
GB 4208-2008 · GB 14048.1 · JB8939
How to Download CJ/T 441-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 14554-1993 — Emission standards for odor pollutants
GB 16297-1996 — Integrated emission standard of air pollutants
GB 16917.1-2014 — Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) -- Part 1: General rules
Secure payment via Stripe
Payments accepted
CJ/T 441-2013
$324.00