YY/T 0183-2013Intra-uterine device lay-up fork (English PDF)
宫内节育器放置叉
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for YY/T 0183-2013 in 30 minutes.
Issued by
NMPA
Level / Type
Industry · Recommended
Issue date
October 21, 2013
Implementation date
October 1, 2014
Scope
YY/T 0183-2013 is the English-translated version of 宫内节育器放置叉.
YY/T 0183-2013 is the Chinese standard "Intra-uterine device lay-up fork". Its scope clause reads: This standard specifies the IUD placement fork (hereinafter referred to as placement fork) structure type, requirements, test methods, inspection rules, signs and Instructions, packaging, transportation and storage.
This standard applies to IUD placement fork, place the O-products for gynecology and obstetrics, and similar shaped intrauterine IUD and correction IUD location purposes.
This standard does not apply to disposable IUD placement fork. Its clauses include structure type.
Found what you need?
Document preview — YY/T 0183-2013
National Standard of the People's Republic of China
- ICS
- 11.200
- Classification
- C 36
- Replacing
- YY/T 0183-1994
Issued by: National Medical Products Administration of the People's Republic of China
Contents
- Foreword
- 1 Scope
- 2 Normative references
1 Scope
This standard specifies the IUD placement fork (hereinafter referred to as placement fork) structure type, requirements, test methods, inspection rules, signs and
Instructions, packaging, transportation and storage.
This standard applies to IUD placement fork, place the O-products for gynecology and obstetrics, and similar shaped intrauterine IUD and correction
IUD location purposes.
This standard does not apply to disposable IUD placement fork.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 1220 stainless steel rods
GB/T 2828.1 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch inspection sampling plan
GB/T 2829 periodic inspection Sampling procedures and tables (suitable for process stability test)
GB/T 4340.1 Vickers hardness test - Part 1. Test methods
GB/T 4423 copper and copper alloy rod drawing
GB/T 6463 Metallic and other inorganic coating thickness - Measurement Methods
GB/T 9969 General Instructions industrial products
GB/T 10610 Geometrical product specifications (GPS) Surface texture Profile method - Rules and procedures for evaluation of the surface structure
YY 0076-1992 metal parts coating technology classification conditions
YY/T 0149-2006 stainless steel medical equipment corrosion test methods
Symbols - Part 1 YY 0466.1 medical equipment used with medical device labels, labeling and information. General requirements
YY/T 1052 surgical instruments logo
3 structure type
3.1
Place fork type, basic dimensions and limit deviations should meet the requirements of Figure 1.
3.2
Place the fork should be used GB/T 4423 specified in copper material or optional stainless steel materials GB/T 1220 regulations.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1220Stainless steel bars
- GB/T 2828.1Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB/T 2829Sampling procedures and tables for periodic inspection by attributes
- GB/T 4340.1Metallic materials - Vickers hardness test - Part 1: Test method
- GB/T 4423Copper and copper alloy cold-drawn rod and bar
- GB/T 6463Metallic and other inorganic coatings -- Review of methods of measurement of thickness
Similar standards
Editions of YY/T 0183
| Edition | Title | Revision | Status |
|---|---|---|---|
| YY/T 0183-2013 | Intra-uterine device lay-up fork | current edition | Current |
| YY/T 0183-1994 | Intra-uterine device lay-up fork | previous edition | Superseded |
This page sells the current edition, YY/T 0183-2013. Earlier editions are listed for reference only.
How to Download YY/T 0183-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10610-2009 — Geometrical product specifications (GPS) -- Surface texture: Profile method -- Rules and procedures for the assessment of surface texture
GB/T 1220-2007 — Stainless steel bars
GB/T 2828.1-2012 — Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
Secure payment via Stripe
Payments accepted
YY/T 0183-2013
$145.00