YY/T 1025-2014Intra-uterine suction curettes (English PDF)

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules.

Instead of the standard YY/T 1025-2004 "abortion suction tube." This standard YY/T 1025-2004 main technical differences are as follows.

--- Modify the scope, defining this standard applies to metallic material abortion suction tube (see Chapter 1);

--- Modify the reference standards and standard reference year (see Chapter 2);

--- Modify the size requirements, only the main parts of a predetermined size (see Table 1);

--- Increasing the dual-chamber type suction tube head and the body of the tube offset distance (see Figure 2);

--- Increase the range of materials suitable for stainless steel (see Table 2);

--- Increasing the suction pipe welding firm requirements and corresponding test methods (see 4.3 and 5.3);

--- Increased corrosion resistance requirements and corresponding test methods (see 4.5 and 5.5).

--- Modify the coating requirements (see 4.6);

1 Scope

This standard specifies the abortion suction tube structure type and material requirements, test methods, inspection rules, marking, packaging, transportation and storage.

This standard applies to metallic material abortion suction tube (hereinafter referred to as the suction pipe). The product is mounted on abortion sucker for early pregnancy Pregnant pregnant woman an abortion surgery.

Note: Some aspects of this standard may be suitable for one-time use abortion suction tube.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 1220 stainless steel rods

GB/T 1527 copper and copper alloy tube drawing

GB/T 2828.1 Sampling procedures for inspection - Part 1.

GB/T 2829 Periodic inspection Sampling procedures and tables (suitable for process stability test)

GB/T 4423 copper and copper alloy rod drawing Reviews on the cover layer thickness measurement GB/T 6463 Metallic and other inorganic

GB/T 10610 Geometrical product specifications (GPS) Surface texture Profile method - Rules and procedures for evaluation of the surface structure

YY 0076-1992 metal parts coating technology classification conditions

YY/T 0149-2006 stainless steel medical equipment corrosion test methods

YY/T 1052 surgical instruments logo

3 Structure type and material