YY/T 0064-2016Electrical and loading characteristics of X-ray tube assemblies for medical diagnosis (English PDF)

Foreword

This standard is drafted in accordance with the rules given in GB/T 1.1-2009.

This standard is equivalent to the use of the International Electrotechnical Commission IEC 60613.:2010 "medical diagnostic X-ray tube assembly electrical and load characteristics." This standard replaces YY/T 0064-2004 "Medical diagnostic rotary anode X-ray tube electrical, thermal and load characteristics".

Compared with YY/T 0064-2004, the main technical changes are as follows.

--- the standard name from the "medical diagnosis of rotating anode X-ray tube electricity, heat and load characteristics" to "medical diagnostic X-ray tube components Electrical and load characteristics ";

--- Added definition and characteristics of X-ray tube caps (see 3.5, 3.6, 3.7);

- Added terminology on CT pipe characteristics (see 3.16, 3.20, 3.21);

--- removed the anode thermal characteristics of the content, the maximum continuous heat dissipation renamed nominal continuous input power.

1 Scope

This standard applies to X-ray tube assemblies for rotary or fixed anodes for medical diagnostics. For X-ray tube heads, their component requirements are also included.

This standard covers the definition and conditions of the performance and load characteristics of X-ray tube assemblies during power-up and power-on.

The description and measurement of these characteristics are given at the appropriate point. Therefore, this standard applies to manufacturers and relevant responsible organizations.

Note. The "measurement" in this standard is related to actual use, so "measurement" results in loss of life of the X-ray tube assembly, which is negligible.

2 Normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this document. For undated references, the latest edition (including all modifications) applies to this document.

Medical electrical equipment - Part 1. General requirements for basic safety and basic performance (Medical IEC 60601-1.:2005); electricalequipment-Part 1. Generalrequirementsforbasicsafetyandessentialperformance)

Medical electrical equipment - Part 1-3. Basic safety and essential performance - General requirements - Parallel standards. IEC 60601-1-3.:2008 Radiation Protection for X-Ray Devices (Medicalelectricalequipment-Part 1-3. Generalrequirementsforbasicsafety andessentialperformance-Colateralstandard. RadiationprotectionindiagnosticX-rayequipment) IEC /T R60788..2004 Medical electrical equipment definition terms (Medicalelectricalequipment-Glossaryof definedterms

3 Terms and definitions

IEC /T R60788..2004, IEC 60601-1.:2005 and IEC 60601-1-3.:2008 and the following terms and definitions apply In this document.