QC/T 727-2004Instruments for automobiles and motorcycles (English PDF)
汽车、摩托车用仪表
This is a limited preview
Buy now to download the full PDF (17 pages)
Need quotation for your management?
Get a formal quotation for QC/T 727-2004 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
October 20, 2004
Implementation date
April 1, 2005
Scope
QC/T 727-2004 is the English-translated version of 汽车、摩托车用仪表.
QC/T 727-2004 is the Chinese standard "Instruments for automobiles and motorcycles". Its scope clause reads: This standard specifies the classification, requirements, test methods, inspection rules, marking, packaging, storage and preservation of instruments for automobile and motorcycle (hereinafter referred to as instruments).
This standard is applicable to speedometer, tachometer, fuel gauge, thermometer, pressure gauge, voltmeter and ammeter for automobile and motorcycle. It may also be referred to for instruments for other motor vehicles. Its clauses include product classification.
Found what you need?
Document preview — QC/T 727-2004
National Standard of the People's Republic of China
- Replacing
- QC/T 10-1992
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword i
- 1 Scope
- 2 Normative references
- 3 Product classification
- 4 Requirements
- 5 Test methods
- 6 Inspection rules
- 7 Marking, packaging, storage and preservation
1 Scope
This standard specifies the classification, requirements, test methods, inspection rules, marking, packaging, storage and preservation of instruments for automobile and motorcycle (hereinafter referred to as instruments).
This standard is applicable to speedometer, tachometer, fuel gauge, thermometer, pressure gauge, voltmeter and ammeter for automobile and motorcycle. It may also be referred to for instruments for other motor vehicles.
2 Normative references
The following documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections) to, or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition applies.
GB/T 191 Packaging—Pictorial marking for handling of goods
GB/T 2423.10 Environmental testing for electric and electronic products—Part 2: Test methods—Test Fc and guidance: Vibration (Sinusoidal)
GB/T 2423.17 Basic environmental testing procedures for electric and electronic products—Test Ka: Salt mist
GB/T 2423.22 Environmental testing for electric and electronic products—Part 2: Test methods—Test N: Change of temperature
GB/T 2423.34 Environmental testing for electric and electronic products—Part 2: Test methods—Test Z/AD: Composite temperature/humidity cyclic test
GB/T 2828.1 Sampling procedures for inspection by attributes—Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
GB/T 8170 Rules for Rounding Off of Numerical Values
GB/T 17619 Limits and methods of testing for immunity of electrical/electronic sub-assemblies in vehicles to electromagnetic radiation
GB/T 21437.2-2008 Road vehicles—Electrical disturbances from conduction and coupling—Part 2: Electrical transient conduction along supply lines only
QC/T 238 Storage and preservation for automotive parts
QC/T 29106 Technical specification of low-voltage electric harness for motor vehicles
3 Product classification
It is divided by function into speedometer, tachometer, fuel gauge, thermometer, pressure gauge, voltmeter, ammeter, and so on. See Table 1 for classification by implementation mode.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.
Referenced standards
Cited by
- QC/T 1169-2022Liquid crystal instruments for automobiles
- QC/T 29032-2013Clogging alarm sensors for automotive air filters
- QC/T 14-2009Tyre pressure gauges for automobiles
- QC/T 462-2009Automotive engine hour meters
- QC/T 208-2007Temperature alarms for automobiles
- QC/T 784-2007Electroluminescent screens for automobile and motorcycle instruments
Similar standards
Editions of QC/T 727
| Edition | Title | Revision | Status |
|---|---|---|---|
| QC/T 727-2004 | Instruments for automobiles and motorcycles | current edition | Current |
| QC/T 10-1992 | Instruments for automobiles and motorcycles | previous edition | Superseded |
This page sells the current edition, QC/T 727-2004. Earlier editions are listed for reference only.
How to Download QC/T 727-2004
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
QC/T 1005-2026 — Performance requirements and bench test methods for hydraulic solenoid valve assembly of electronic stability control system and antilock brake system of automoive
QC/T 1022-2026 — Technical specifications and test methods of reduction gearbox for battery electric vehicles
QC/T 1041-2026 — Control system of fuel evaporative pollutants from Motorcycles with petrol engine
QC/T 727-2004
$245.00