QC/T 585-2011Technical specifications for mechanical jacks of passenger cars (English PDF)
乘用车机械式千斤顶技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for QC/T 585-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 18, 2011
Implementation date
August 1, 2011
Scope
QC/T 585-2011 is the English-translated version of 乘用车机械式千斤顶技术条件.
Mechanical jacks supplied with passenger cars are covered by QC/T 585-2011 in the recommended series of the Chinese automobile industry. It states the technical requirements for such jacks and the test methods, inspection rules, marking, packaging, transport and storage that belong with them.
The jacks in question are the vehicle tools used for changing a tyre on a passenger car or for fitting snow chains. This edition replaces QC/T 585-1999. It cites GB/T 3730.1-2001, GB/T 3730.2-1996, GB/T 9286-1998 and QC/T 625-1999. Issued on 18 May 2011, it has applied since 1 August 2011.
Found what you need?
Document preview — QC/T 585-2011
National Standard of the People's Republic of China
- ICS
- 43.040.60
- Replacing
- QC/T 585-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.2 Abbreviations
- 4 Technical requirements
- 5 Test Methods
- 5.1 Protocol stack
- 5.2 Node state
- 5.3 Transmission rate
- 5.4 Connectivity
- 5.5 Bit error rate
- 5.6 Wiring harness fault diagnosis
- 5.7 Electrical indexes
- 6 Inspection Rules
- 6.1 Test environment
- 7 Signs, documents, packaging, transportation and storage
- 8 Inspection report
- 9 Marks, packaging
1 Foreword
QC/T 585-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 18 May 2011 and has been in force since 1 August 2011.
It replaces the earlier edition QC/T 585-1999.
The QC/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
Mechanical jacks supplied with passenger cars are covered by QC/T 585-2011 in the recommended series of the Chinese automobile industry. It states the technical requirements for such jacks and the test methods, inspection rules, marking, packaging, transport and storage that belong with them. The jacks in question are the vehicle tools used for changing a tyre on a passenger car or for fitting snow chains. This edition replaces QC/T 585-1999. It cites GB/T 3730.1-2001, GB/T 3730.2-1996, GB/T 9286-1998 and QC/T 625-1999.
QC/T 585-2011 falls under ICS 43.040.60, in the field of road vehicle engineering.
This catalogue holds 396 other QC/T standards in that field.
In this catalogue, QC/T standards carry edition years from 1991 to 2026.
3 Normative references
GB/T 3730.1-2001 — Motor vehicles and trailers - Types - Terms and definitions
GB/T 3730.2-1996 — Road vehicle. Masses. Vocabulary and codes
GB/T 9286-1998 — Paints and varnishes--Cross cut test for films
QC/T 625-1999 — Metallic coatings and chemical conversion coatings for automobiles
4 Where this standard sits
QC/T 585-2011 is classified under ICS 43.040.60, in the field of road vehicle engineering.
It cites 4 standards, among them GB/T 3730.1-2001, GB/T 3730.2-1996, GB/T 9286-1998, listed in full above.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
6 Related standards
Other editions:
QC/T 585-1999 (earlier edition)
Standards on related subjects:
QC/T 566-2024 — External protection for passenger cars
QC/T 629-2021 — Automobile sun visors
QC/T 323-2026 — Performance requirements and test methods for automotive opening and closing components
QC/T 627-2025 — Electronic locks device for motor vehicles
7 Classification and status
International classification (ICS): 43.040.60
Chinese Standard Classification (CCS): T 26
Prefix QC/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
Similar standards
Editions of QC/T 585
| Edition | Title | Revision | Status |
|---|---|---|---|
| QC/T 585-2011 | Technical specifications for mechanical jacks of passenger cars | current edition | Current |
| QC/T 585-1999 | Technical specifications for mechanical jacks of passenger cars | previous edition | Superseded |
This page sells the current edition, QC/T 585-2011. Earlier editions are listed for reference only.
How to Download QC/T 585-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 3730.1-2001 — Motor vehicles and trailers - Types - Terms and definitions
GB/T 3730.2-1996 — Road vehicle. Masses. Vocabulary and codes
GB/T 9286-1998 — Paints and varnishes--Cross cut test for films
Secure payment via Stripe
Payments accepted
QC/T 585-2011
$195.00