Valid

QC/T 2-2017Formats of automotive product drawings (English PDF)

汽车产品图样格式

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for QC/T 2-2017 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

January 9, 2017

Implementation date

July 1, 2017

Scope

QC/T 2-2017 is the English-translated version of 汽车产品图样格式.

QC/T 2-2017 is the Chinese standard "Formats of Automotive Product Drawing". Its scope clause reads: This Standard specifies the format and filling rules of the automotive product drawing.

This Standard is applicable to the making of the automotive product drawing (hereinafter referred to as drawing). Its clauses include terms and definitions; general requirements; drawing format.

It was issued by the Ministry of Industry and Information Technology on JANUARY 09, 2017 and took effect on JULY 01, 2017.

Found what you need?

Document preview — QC/T 2-2017

National Standard of the People's Republic of China

Replacing: QC/T 2-1992

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Announcement
Foreword
1 Scope
2 Normative References
3 Terms and Definitions
4 General Requirements
5 Drawing Format
Appendix A (Informative) Product Drawing Format
Annex:
References, names and dates of implementation of 42 automotive industry

1 Scope

This Standard specifies the format and filling rules of the automotive product drawing.

This Standard is applicable to the making of the automotive product drawing (hereinafter referred to as drawing).

2 Normative References

The following documents are essential to the application of this document. For the dated documents, only the versions with the dates indicated are applicable to this document; for the undated documents, only the latest version (including all the amendments) are applicable to this document.

GB/T 10609.1 Technical Drawings - Title Blocks

GB/T 10609.2 Technical Drawings - Item Lists

GB/T 14689 Technical Drawings - Size and Layout of Drawing Sheets

GB/T 14690 Drawings Scales

QC/T 4 Method for Change about Product Drawing and Design Document Regulations of Automobile

QC/T 18 Terminology for Automotive Product Drawing and Design Document

3 Terms and Definitions

For the purpose of this document, the terms and definitions given in QC/T 18 apply.

4 General Requirements

4.1 The size of the product drawing width shall be as specified in GB/T 14689. The center point of each s ide length in the drawing shall have a centering symbol, which shall be drawn with a thick solid line; the line width shall be no less than 0.5mm; the length shall be from the boundary of the paper; reach about 5mm within the frame. symbols; S: marking code for the trial produce stage drawing; Z: making code for the production arrangements drawing; B: marking code for the start of regular production drawing.

NOTE: the round number may also be added to the right of the mark code in each stage; the round number shall be represented by Arabic numerals, for instance, the second-round prototype car (machine) trial production drawing mark code is S2.

g) Organization name block: fill in the name or code of the design organization.

5 Drawing Format

5.1.1.2 Name area

The name area consists of drawing name block, and material mark block.

a) Patter name block: fill in the name of the design object. Where there are the terms for parts and components specified in standard, it shall be filled in according to the name specified in the standard. If there is a standard English name, the English name shall be filled in below the Chinese name;

b) Material mark block: fill in the material code mark of the part in the part drawing; the assembly drawing shall not be marked.

5.1.1.3 Signature area

Each block of the signature area shall be signed and dated according to the design, check, review, standard, joint signature, and approval.

5.1.2 Extended title block

The extended title block is a part that extends the upper part or all of the main title block into the drawing. The extended title block includes item number block, extended item name block, extended item material block, extended item mass block, and extended drawing mark block.

5.1.2.1 The role of extended title block

The extended title block aims to satisfy the requirements of filling in two or more drawing names and numbers in the title block of a drawing.

5.1.2.2 Filling of extended title block

When the part/component is a left-right (up-down or front-back) symmetrical part, fill in the number and name of the left (up or front) part/component in the main title block; while fill in the number and name of the right (down or back) part/component in the […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

Cited by

Similar standards

QC/T 1-2017|QC/T 18-2017|QC/T 3-2017|QC/T 4-2017|QC/T 5-2017|YY/T 0049-1991

Editions of QC/T 2

Edition	Title	Revision	Status
QC/T 2-2017	Formats of automotive product drawings	current edition	Current
QC/T 2-1992	Formats of automotive product drawings	previous edition	Superseded

This page sells the current edition, QC/T 2-2017. Earlier editions are listed for reference only.

How to Download QC/T 2-2017

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.