NB/T 20003.6-2021Non-destructive testing for mechanical components in nuclear island of nuclear power plants - Part 6: Eddy current testing of tubular products (English PDF)
核电厂核岛机械设备无损检测 第6部分：涡流检测
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for NB/T 20003.6-2021 in 30 minutes.
Issued by
NEA
Level / Type
Industry · Recommended
Issue date
January 7, 2021
Implementation date
July 1, 2021
Scope
NB/T 20003.6-2021 is the English-translated version of 核电厂核岛机械设备无损检测 第6部分：涡流检测.
NB/T 20003.6-2021 is the Chinese standard "Non-destructive testing for mechanical components in nuclear island of nuclear power plants - Part 6: Eddy current testing of tubular products".
Its scope clause reads: This document specifies the technical requirements for eddy current testing of tube products for mechanical components in nuclear island of nuclear power plants.
This document is applicable to eddy current testing during manufacturing and installation of tube products for mechanical components in nuclear island of nuclear power plants. Its clauses include terms and definitions; general requirements.
Found what you need?
Document preview — NB/T 20003.6-2021
National Standard of the People's Republic of China
- Replacing
- NB/T 20003.6-2010
Issued by: National Energy Administration of the People's Republic of China
Contents
- Foreword i
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 General requirements
- 5 Testing equipment
- 6 Testing conditions
- 7 Equipment adjustment and review
- 8 Testing technology
- 9 Testing report
- Annex A (Normative) Outer feed-through coil eddy current testing of tube products
- Annex B (Normative) Inner feed-through coil eddy current testing of non-ferromagnetic heat exchanger tubes
- Annex C (Normative) Background noise control for eddy current testing of steam generator tubes
- Annex D (Normative) Control of eddy current testing signal indication after steam generator tube bending
- Annex E (Normative) Method for evaluating the signal indication depth on the inner wall of non-ferromagnetic tubes
- Bibliography
1 Scope
This document specifies the technical requirements for eddy current testing of tube products for mechanical components in nuclear island of nuclear power plants.
This document is applicable to eddy current testing during manufacturing and installation of tube products for mechanical components in nuclear island of nuclear power plants.
2 Normative references
The following documents contain requirements which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 12604.6 Non-destructive testing - Terminology - Terms used in eddy current testing
NB/T 20003.1-2021 Non-destructive testing for mechanical components in nuclear island of nuclear power plants - Part 1: General requirements
3 Terms and definitions
For the purposes of this document, the terms and definitions given in GB/T 12604.6 and NB/T 20003.1 and the following apply.
3.1 reference tube
sample tube used for adjusting and reviewing testing systems and processing artificial defects
3.2 testing coil
toroidal coil or coil group that induces eddy current signals
4 General requirements
4.1 Testing personnel
The requirements specified in 5.1 of NB/T 20003.1-2021 shall apply.
4.2 Testing documents
4.2.1 Basic requirements for testing documents
The testing procedures, process cards or other testing documents shall meet the requirements of 5.4 in NB/T 20003.1-2021. Eddy current testing shall be carried out in accordance with valid written testing documents.
4.2.2 Main contents of testing procedures
The following contents shall be included:
——application scope;
——design documents, standards, and regulations referenced;
——qualification of testing personnel;
——designation, nominal outer diameter and nominal thickness of the tube;
——testing equipment: eddy current instruments, testing coils, automatic testing devices, reference tubes, etc.;
——testing conditions: testing time, testing area and surface conditions;
——adjustment of testing system: testing frequency setting, phase adjustment, sensitivity adjustment, etc.;
——reviewing of testing system;
——testing technology;
——recording guidelines;
——acceptance criteria;
——filing and preservation of testing documents, records, reports and other information;
——preparation, examination and approval of procedures.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of NB/T 20003.6
| Edition | Title | Revision | Status |
|---|---|---|---|
| NB/T 20003.6-2021 | Non-destructive testing for mechanical components in nuclear island of nuclear power plants - Part 6: Eddy current testing of tubular products | current edition | Current |
| NB/T 20003.6-2010 | Non-destructive testing for mechanical components in nuclear island of nuclear power plants - Part 6: Eddy current testing of tubular products | previous edition | Superseded |
This page sells the current edition, NB/T 20003.6-2021. Earlier editions are listed for reference only.
How to Download NB/T 20003.6-2021
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
NB/T 20003.7-2021 — Non-destructive testing for mechanical components in nuclear island of nuclear power plants - Part 7: Visual testing
NB/T 20003.5-2021 — Non-destructive testing for mechanical components in nuclear island of nuclear power plants - Part 5: Magnetic particle testing
NB/T 20003.8-2021 — Non-destructive testing for mechanical components in nuclear island of nuclear power plants - Part 8: Leak testing
Secure payment via Stripe
Payments accepted
NB/T 20003.6-2021
$270.00