NB/T 20003.5-2021Non-destructive testing for mechanical components in nuclear island of nuclear power plants - Part 5: Magnetic particle testing (English PDF)
核电厂核岛机械设备无损检测 第5部分：磁粉检测
This is a limited preview
Buy now to download the full PDF (22 pages)
Need quotation for your management?
Get a formal quotation for NB/T 20003.5-2021 in 30 minutes.
Issued by
NEA
Level / Type
Industry · Recommended
Issue date
January 7, 2021
Implementation date
July 1, 2021
Scope
NB/T 20003.5-2021 is the English-translated version of 核电厂核岛机械设备无损检测 第5部分：磁粉检测.
NB/T 20003.5-2021 is the Chinese standard "Non-destructive testing for mechanical components in nuclear island of nuclear power plants - Part 5: Magnetic particle testing".
Its scope clause reads: This document specifies the technical requirements for continuous magnetic particle testing of mechanical components in nuclear island of nuclear power plants.
This document is applicable to magnetic particle testing during the manufacturing and installation of ferromagnetic materials, parts and components, and welded joints in mechanical components in nuclear island of nuclear power plants.
It is not applicable to the testing of non-ferromagnetic materials. Its clauses include terms and definitions; general requirements.
Found what you need?
Document preview — NB/T 20003.5-2021
National Standard of the People's Republic of China
- Replacing
- NB/T 20003.5-2010
Issued by: National Energy Administration of the People's Republic of China
Contents
- Foreword i
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 General requirements
- 5 Magnetic particle testing equipment and apparatus
- 6 Calibration and verification
- 7 Magnetizing electric currents
- 8 Testing methods
- 9 Testing process
- 10 Testing report
- Annex A (Normative) System performance verification of fixed magnetic particle flaw detectors
- Annex B (Normative) Standard test rings, and reference test pieces for performance test of detection media
- Annex C (Informative) Relationship among peak, average and effective values of several sine wave currents
- Annex D (Informative) Typical magnetization methods of welded joints
1 Scope
This document specifies the technical requirements for continuous magnetic particle testing of mechanical components in nuclear island of nuclear power plants.
This document is applicable to magnetic particle testing during the manufacturing and installation of ferromagnetic materials, parts and components, and welded joints in mechanical components in nuclear island of nuclear power plants. It is not applicable to the testing of non-ferromagnetic materials.
2 Normative references
The following documents contain requirements which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 4956 Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method
GB 11533 Standard for logarithmic visual acuity charts
GB/T 12604.5 Non-destructive testing - Terminology - Terms used in magnetic particle testing
GB/T 15822.2 Non-destructive testing-Magnetic particle testing - Part 2: Detection media
GB/T 15822.3 Non-destructive Testing - Magnetic Particle Testing - Part 3: Equipment
GB/T 23906 Non-destructive testing - Rings for magnetic particle testing
GB/T 23907 Non-destructive testing - Shims for magnetic particle testing
JB/T 6870 Specifications for the mobile rotating-field flaw detectors
JB/T 7411 Non-destructive testing instruments - Specification of electricity magnetic yoke magnetic particle flaw detector
JB/T 8290 Non-destructive testing instruments - Magnetic particle flaw detectors
NB/T 20003.1-2021 Non-destructive testing for mechanical components in nuclear island of nuclear power plants - Part 1: General requirements
3 Terms and definitions
For the purpose of this document, the terms and definitions given in GB/T 12604.5 and NB/T 20003.1-2021 apply.
3.1 magnetization by electric current flow
establishing a magnetic field by passing electric current (AC, rectified, or DC) through the entire workpiece or a part of it
3.2 magnetization by magnetic flow
establishing a magnetic field in the entire workpiece or a part of it by electromagnetic yoke or indirect induction
3.3 relevant indication
magnetic particle indication formed by the flux leakage field caused by defects attracting magnetic particles during magnetic particle testing, generally referred to as defect indication
3.4 non-relevant indication
magnetic particle indication formed by the flux leakage field caused by changes in cross-section or material permeability attracting magnetic particles during magnetic particle testing
3.5 false indication
magnetic particle indication not formed by the flux leakage field attracting magnetic particles
4 General requirements
4.1 Testing personnel
The testing personnel shall meet the requirements of NB/T 20003.1.
The testing personnel shall undergo vision examination annually. Their uncorrected or corrected near vision shall not be less than 4.8, and the test method shall meet the requirements of GB 11533.
The testing personnel shall undergo color vision examination annually, and such examination shall not reveal color blindness or color weakness.
4.2 Testing documents
The testing procedures, process cards or other testing documents shall meet the requirements of NB/T 20003.1-2021, 5.4. Magnetic particle testing shall be conducted according to effective testing procedures.
The testing procedures shall cover at least the following contents:
——Scope of application: type, size, testing range and material of the tested workpiece;
——Reference codes, standards, design documents, etc.;
——Qualification of testing personnel;
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 22 pages — is available in the English PDF.
Referenced standards
Cited by
- NB/T 20482-2018Specification for design and construction of steel containment vessel of nuclear power plant of PWR
- NB/T 20269-2014Design and fabrication specification for reactor coolant pump of pressurized water reactor nuclear power plant
- NB/T 20006.12-2011Alloy steel for pressurized water reactor nuclear power plants - Part 12: Mn-Ni-Mo steel main flange forgings for pressurized water reactor coolant pumps
- NB/T 20006.6-2011Alloy Steel for Pressurized Water Reactor Nuclear Power Plants - Part 6: Mn-Ni-Mo Steel Forgings for PWR Steam Generator Tube Plates
- NB/T 20008.2-2010Other Material for Pressurized Water Reactor Nuclear Power Plants - Part 2: Mn-mo-v Steel Castings for Use in the Fabrication of Steam Generator and Reactor Coolant Pump Supports, Main Steam Line Supports
- NB/T 20010.4-2010PWR Nuclear Power Plant Valve - Part 4: Specification of Carbon Steel Forging
Similar standards
Editions of NB/T 20003.5
| Edition | Title | Revision | Status |
|---|---|---|---|
| NB/T 20003.5-2021 | Non-destructive testing for mechanical components in nuclear island of nuclear power plants - Part 5: Magnetic particle testing | current edition | Current |
| NB/T 20003.5-2010 | Non-destructive testing for mechanical components in nuclear island of nuclear power plants - Part 5: Magnetic particle testing | previous edition | Superseded |
This page sells the current edition, NB/T 20003.5-2021. Earlier editions are listed for reference only.
How to Download NB/T 20003.5-2021
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
NB/T 20003.6-2021 — Non-destructive testing for mechanical components in nuclear island of nuclear power plants - Part 6: Eddy current testing of tubular products
NB/T 20003.4-2010 — Non-destructive testing for mechanical components in nuclear island of nuclear power plants - Part 4: Penetrant testing
NB/T 20003.7-2021 — Non-destructive testing for mechanical components in nuclear island of nuclear power plants - Part 7: Visual testing
Secure payment via Stripe
Payments accepted
NB/T 20003.5-2021
$390.00