NB/T 11126-2023Technical specification for application of active explosive isolation and suppression devices in coal mine (English PDF)
煤矿用主动式隔抑爆装置应用技术规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for NB/T 11126-2023 in 30 minutes.
Issued by
NEA
Level / Type
Industry · Recommended
Issue date
February 6, 2023
Implementation date
August 6, 2023
Scope
NB/T 11126-2023 is the English-translated version of 煤矿用主动式隔抑爆装置应用技术规范.
NB/T 11126-2023 is the Chinese energy industry technical specification for applying active explosion suppression and active explosion isolation devices in coal mines.
Such devices rely on early detection of combustion or explosion signals by flame or shock wave detectors, after which a controller triggers the release of a suppressant to extinguish the flame or form a barrier that stops the explosion spreading.
The standard sets general requirements for their application, installation requirements for the devices, and rules for their maintenance and management. Terms are aligned with GB/T 15604-2008 and with AQ 1079-2009. Issued on 6 February 2023, it has applied since 6 August 2023.
Found what you need?
Document preview — NB/T 11126-2023
National Standard of the People's Republic of China
- ICS
- 13.100
- Classification
- D 09
Issued by: National Energy Administration of the People's Republic of China
Contents
- Preface
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 General requirements
- 5 Installation requirements for active explosion-proof and suppression devices
- 6 Maintenance and Management
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1. Structure and Drafting Rules for Standardization Documents" drafting.
1 Scope
This document specifies the general requirements for the application technology of active explosion suppression devices and active explosion isolation devices used in coal mines, device installation requirements, maintenance and management.
This document applies to the application of active explosion suppression devices and active explosion isolation devices for coal mines.
2 Normative references
The contents of the following documents constitute the essential provisions of this document through normative references in the text. Among them, dated references For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document.
GB/T 15604-2008 Dust Explosion Protection Terminology
AQ1079-2009 General technical requirements for automatic powder spraying and explosion suppression devices for gas pipeline transportation
3 Terms and Definitions
The following terms and definitions defined in GB/T 15604-2008 and AQ1079-2009 apply to this document.
3.1 Explosion suppression
In the initial stage of the explosion, the technology of extinguishing the explosion flame through physical and chemical effects and inhibiting the development of the explosion. [Source: GB/T 15604-2008,5.2]
3.2 Explosion isolation
After the explosion occurs, the explosion flame is extinguished through physical and chemical effects to prevent the explosion from spreading. [Source: GB/T 15604-2008,5.5]
3.3 Active explosion isolation and suppression device
Active explosion suppression devices include active explosion suppression devices and active explosion suppression devices. Active explosion suppression device refers to the initial stage of explosion,
Relying on the advanced detection of combustion or explosion information, the flame suppressant is sprayed through the explosion suppressor to extinguish the explosion flame. Active flameproof devices are After the explosion occurs, relying on the advanced detection of explosion information, the flame suppressant is sprayed through the flameproof device to form a flameproof barrier to prevent the explosion from spreading. device.
3.4 Detector
A device that can receive combustion or explosion information and convert it into a usable signal.
NOTE: Includes flame detectors and shock wave detectors.
3.5 Controller
A device that processes combustion or explosion information and triggers an explosion suppressor or flameproof device.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
AQ1079-2009
Similar standards
How to Download NB/T 11126-2023
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
NB/T 10086-2025 — Regulations for Compiling Energy Conservation Reports for Wind Farm Projects
NB/T 10103-2025 — Technical Specifications for Micro-Site Selection in Wind Farm Projects
NB/T 10116-2025 — Recommended Practices for Reducing the Impact of Hydraulic Fracturing Operations on the Surface Environment
Secure payment via Stripe
Payments accepted
NB/T 11126-2023
$135.00