Valid

NB/T 10732-2021Barbecue charcoal briquette from coal (English PDF)

煤基烧烤炭

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for NB/T 10732-2021 in 30 minutes.

Issued by

NEA

Level / Type

Industry · Recommended

Issue date

November 16, 2021

Implementation date

February 16, 2022

Scope

NB/T 10732-2021 is the English-translated version of 煤基烧烤炭.

NB/T 10732-2021 specifies coal-based barbecue charcoal, a briquetted grilling fuel made from water-quenched semi-coke rather than wood. It sets requirements for raw and auxiliary materials, technical requirements for the product, test methods, inspection rules, and packaging, labelling, transport and storage.

Combustion emissions are assessed with environmental methods for carbon monoxide (HJ/T 44), sulfur dioxide (HJ 57), nitrogen oxides (HJ/T 693) and Ringelmann smoke blackness (HJ/T 398), and mercury is measured by direct solid-sampling analysis to SN/T 3511.

The document defines no special terms of its own. Issued on 16 November 2021, it has applied since 16 February 2022.

Found what you need?

Document preview — NB/T 10732-2021

National Standard of the People's Republic of China

Classification
D 04

Issued by: National Energy Administration of the People's Republic of China

Contents

  • Preface
  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 4 Requirements for raw materials and excipients
  • 5 Technical requirements
  • 6 Test method
  • 7 Inspection Rules
  • 8 Packaging, labelling, transportation and storage

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents" drafted.

1 Scope

This document specifies the raw material and auxiliary material requirements, technical requirements, test methods, inspection rules, packaging, labeling, transportation and storage.

This document applies to coal-based barbecue charcoal products prepared from water-quenched blue charcoal.

2 Normative references

The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document.

GB/T 212 Industrial Analysis Method of Coal

GB/T 213 Determination method of calorific value of coal

GB/T 214 Determination method of total sulfur in coal

GB/T 216 Determination method of phosphorus in coal

GB/T 3058 Determination method of arsenic in coal

GB/T 3558 Determination method of chlorine in coal

GB/T 4633 Determination method of fluorine in coal

GB/T 16157 Determination of particulate matter in exhaust gas from stationary pollution sources and sampling methods for gaseous pollutants

GB/T 16658 Determination method of chromium, cadmium and lead in coal

GB/T 16659 Determination method of mercury in coal

GB/T 25209 Commercial coal identification

GB/T 25214 Determination of total sulfur in coal by infrared spectroscopy

GB/T 30732 Industrial Analysis Methods for Coal Instrumental Methods

GB 34170 Commercial coal quality civil briquette

HJ/T 44 Determination of carbon monoxide in exhaust gas from stationary pollution sources Non-dispersive infrared absorption method

HJ57 Determination of Sulfur Dioxide in Waste Gas from Stationary Pollution Source Constant Potential Electrolysis

HJ/T 398 Determination of the blackness of flue gas emitted by stationary pollution sources - Ringelmann flue gas blackness diagram method

HJ/T 693 Determination of nitrogen oxides in waste gas from stationary pollution sources by constant potential electrolysis

MT/T 1 Determination method of gangue content and lower limit rate of commercial coal

MT/T 748 Determination method of cold-pressed strength of industrial briquette

SN/T 3511 Determination of mercury in minerals - General rules for the direct measurement of mercury by solid injection

3 Terms and Definitions

There are no terms and definitions that need to be defined in this document.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download NB/T 10732-2021

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

NB/T 10732-2021

$120.00