Valid

JR/T 0025.3-2013China financial integrated circuit card specifications - Part 3: Specification on application independent ICC to terminal interface requirements (English PDF)

Preview PDF

This is a limited preview

Buy now to download the full PDF (34 pages)

Need quotation for your management?

Get a formal quotation for JR/T 0025.3-2013 in 30 minutes.

Issued by

the People's Bank of China

Level / Type

National · Recommended

Issue date

February 5, 2013

Implementation date

February 5, 2013

Scope

JR/T 0025.3-2013 (China financial integrated circuit card specifications - Part 3: Specification on application independent ICC to terminal interface requirements) is available as an English-translated PDF.

JR/T 0025.3-2013 is the Chinese standard "China financial integrated circuit card specifications - Part 3: Specification on application independent ICC to terminal interface requirements".

Its scope clause reads: This part of JR/T 0025 specifies content on application independent IC card and terminal interface, including electromechanical interface of card, card operation process, physical transmission of characters, answer to reset, transport protocols, files, commands, and application selection mechanism.

This part applies to IC card and terminal manufacturers, system designer of payment system, and the personnel of developing IC card financial application.

Found what you need?

Document preview — JR/T 0025.3-2013

National Standard of the People's Republic of China

ICS: 35.240.40
Classification: A 11

Issued by: the People's Bank of China

Foreword4
Introduction6
1 Scope7
2 Normative references7
3 Terms and definitions8
4 Symbols and abbreviations12
5 Electromechanical interface16
5.1 Low voltage IC card transplant16
5.2 Mechanical properties of IC card17
5.3 Electrical characteristics of IC card18
5.4 Mechanical properties of terminals22
5.5 Electrical characteristics of terminal24
6 Card operation process28
6.1 Normal card operation process29
6.2 Abnormal termination of transaction process32
7 Physical transmission of characters32
7.1 Bit duration time32
7.2 Character frame33
8 Answer to reset34
8.2 IC card loopback character during ATR period35
8.3 Character definition36
8.4 Behaviors of the terminal during ATR process44
8.5 Answer to reset - terminal process45
9 Transport protocol46
9.1 Physical layer47
9.2 Data link layer47
9.3 Terminal transport layer60
9.4 Application layer67
10 Files69
10.1 File structure69
10.2 File reference70
11 Command71
11.1 Message structure71
11.2 Read record C-APDU / R-APDU73
11.3 Select C-APDU / R-APDU74
12 Application selection76
12.1 Overview of application selection76
12.2 IC card data used in application selection78
12.3 Establishing the candidate list80
13 Reservation and use of AID87
13.1 Structure and length of the application identifier (AID)87
13.2 Overall code of application provider identifier (AID)88
13.3 Dedicated application identifier extension (PIX) code88
13.4 Definition of application type code88
Annex A (Informative) Example of using T= 0 protocol exchange90
Annex B (Normative) Data element sheet93
Annex C (Informative) Example of directory structure96
Bibliography97

1 Scope

This part of JR/T 0025 specifies content on application independent IC card and terminal interface, including electromechanical interface of card, card operation process, physical transmission of characters, answer to reset, transport protocols, files, commands, and application selection mechanism.

This part applies to IC card and terminal manufacturers, system designer of payment system, and the personnel of developing IC card financial application.

2 Normative references

The articles contained in the following documents have become part of this document when they are quoted herein. For the dated documents so quoted, all the modifications (Including all corrections) or revisions made thereafter shall be applicable to this document.

GB/T 2659 Codes for the representation of names of countries and regions

GB/T 4880.1 Codes for the representation of names of language - Part 1.Alpha-2 code

GB/T 15120.1 Identification cards-Recording technique - Part 1.Embossing

GB/T 15120.3 Identification cards-Recording technique - Part 3.Location of embossed characters on ID-1 cards

GB/T 16649.1 Identification cards - Integrated circuit (s) cards with contacts - Part 1.

Physical characteristics

GB/T 16649.2 Identification cards-Integrated circuit (s) cards with contacts - Part 2.

Dimensions and location of the contacts

GB/T 16649.3 Identification cards - Integrat...

GB/T 19584-2010 | GB/T 12406-2008 | JR/T 0025.12-2018 | […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 34 pages — is available in the English PDF.

Referenced standards

Normative references

GB/T 4880.1 · GB/T 15120.3 · GB/T 16649.1

Cited by

JR/T 0025.12-2013China financial integrated circuit card specifications. Part 12: Contactless integrated circuit card payment specification

How to Download JR/T 0025.3-2013

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.