JG/T 569-2019General technical requirements wood-based siding used for building decoration (English PDF)
This is a limited preview
Buy now to download the full PDF (16 pages)
Need quotation for your management?
Get a formal quotation for JG/T 569-2019 in 30 minutes.
Issued by
Ministry of Housing and Urban-Rural Development of the People's Republic of China
Level / Type
National · Recommended
Issue date
January 1, 1970
Implementation date
December 1, 2019
Scope
JG/T 569-2019 (General technical requirements wood-based siding used for building decoration) is available as an English-translated PDF.
JG/T 569-2019 — This standard specifies the terms and definitions, classification and marking, general requirements,, test methods, and inspection regulations for wooden hanging boards for architectural decoration.
Rules, signs, packaging, transportation and storage. This standard applies to wooden hanging boards for indoor and outdoor decoration of buildings.
Found what you need?
Document preview — JG/T 569-2019
National Standard of the People's Republic of China
- ICS
- 91.060
- Classification
- Q 71
Issued by: Ministry of Housing and Urban-Rural Development of the People's Republic of China
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Classification and marking
- 5 General requirements
- 6 Requirements
- 7 Test method
- 8 Inspection rules
- 9 Marking, packaging, transportation and storage
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard was proposed by the Standard Rating Research Institute of the Ministry of Housing and Urban-Rural Development.
This standard is under the jurisdiction of the Technical Committee for Standardization of Building Products and Components of the Ministry of Housing and Urban-Rural Development.
The organization responsible for drafting this standard. Timber Conservation Development Center, Fujian Dazhuang Bamboo Industry Technology Co., Ltd.
Participated in the drafting of this standard. Qingdao Jialijia New Material Co., Ltd., Guangdong Yaodonghua Decoration Material Technology Co., Ltd., Ganzhou Sentai Bamboo and Wood Co., Ltd., Inner Mongolia Qingyan Salix Industrial Engineering Technology Center Co., Ltd., Suzhou Epaite Wood Co., Ltd., Guangxi Fenglin Wood Co., Ltd.
Group Co., Ltd., Shanghai Yihuang Wood Industry Co., Ltd., Guangzhou Tianzhixiang Decoration Materials Co., Ltd., Heshan Musen Wood Products Co., Ltd.
Division, Anhui Huijing Wooden House Construction Engineering Co., Ltd., Dongguan Yingsan Building Material Technology Co., Ltd., China Construction Xinli Construction Development Group Co., Ltd.
Company, Chongqing Foreign Construction (Group) Co., Ltd., Beijing Meihaojiayuan Landscape Public Facilities Manufacturing Co., Ltd., Shanghai Bihu New Materials Technology Co., Ltd., Fujian Zhangping Mucun Forest Products Co., Ltd., Finland Sawmill Industry Association, Chongqing Zhongke Construction (Group) Co., Ltd., Qingdao Shunxing Forest Structure Engineering Co., Ltd., Chongqing Construction Engineering No. 8 Construction Co., Ltd., Xiamen Woody Wood Industry Co., Ltd., Shanghai Gaoxiu Horticulture Building Materials Co., Ltd., Chongqing Construction Engineering Yuyuan Building Decoration Co., Ltd., Yuejing Timber Industry Co., Ltd., Shanghai Dadi Wood Industry Technology Co., Ltd.
Company, Zhejiang Haiyue Wood Structure Technology Co., Ltd., Shanghai Miang Wood Industry Co., Ltd., Chongqing Chenhe Construction Engineering Co., Ltd., National Timber and Wood product performance and quality supervision and inspection center, China Wood Protection Industry Association.
1 Scope
This standard specifies the terms and definitions, classification and marking, general requirements,, test methods, and inspection regulations for wooden hanging boards for architectural decoration.
Rules, signs, packaging, transportation and storage.
This standard applies to wooden hanging boards for indoor and outdoor decoration of buildings.
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article Pieces. For undated reference documents, the latest version (including all amendments) is applicable to this document.
GB/T 1931 Method for determination of wood moisture content GB/T 2411 Use a hardness tester to determine the indentation hardness (Shore hardness) of plastics and hard rubber GB 8624 Classification of burning performance of building materials and products GB/T 15036.2-2018 Solid Wood Flooring Part 2: Inspection Method GB/T 16422.2 Plastic laboratory light source exposure test method Part 2: Xenon arc lamp GB/T 17657-2013 Test method for physical and chemical properties of wood-based panels and facing wood-based panels GB 18580 The limit of formaldehyde emission in wood-based panels and products for indoor decoration and refurbishment materials GB 18584 Limits of harmful substances in interior decoration materials and wooden furniture GB/T 19367-2009 Determination of the size of wood-based panels GB/T 24137-2009 Wood plastic decorative board GB/T 34722 Impregnated adhesive film paper veneer plywood and blockboard LY/T 1279 PVC film facing artificial board LY/T 1787-2008 Glulam non-structural use
3 Terms and definitions
The following terms and definitions apply to this document.
Wood-basedsiding
Wood or part of wood is used as a base material for building interior and exterior decoration.
Solidwoodsiding
Wooden hanging boards directly processed from solid wood sawn timber or jigsaw.
Modifiedwood
Wood treated to improve the performance of wood.
Modified woodsiding
Solid wood plywood made of modified wood as the base material.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 16 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 2411Plastics and ebonite -- Determination of indentation hardness by means of a durometer (shore hardness)
- GB 8624Classification for burning behavior of building materials and products
- GB/T 15036.2-2018Solid wood flooring - Part 2: Examination methods
- GB/T 16422.2Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps
- GB/T 17657-2013Test methods of evaluating the properties of wood-based panels and surface decorated wood-based panels
- GB 18580Decorating and refurbishing materials for interior use - Limit on formaldehyde emission of wood-based panels and their products
GB/T 1931
How to Download JG/T 569-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 18580-2025 — Decorating and refurbishing materials for interior use - Limit on formaldehyde emission of wood-based panels and their products
GB 18584-2024 — Limit of harmful substances of furniture
GB 8624-2025 — Classification for burning behavior of building materials and products
Secure payment via Stripe
Payments accepted
JG/T 569-2019
$414.00