JG/T 567-2019Low density and high strength ceramic panel for building (English PDF)
This is a limited preview
Buy now to download the full PDF (7 pages)
Need quotation for your management?
Get a formal quotation for JG/T 567-2019 in 30 minutes.
Issued by
Ministry of Housing and Urban-Rural Development of the People's Republic of China
Level / Type
National · Recommended
Issue date
January 1, 1970
Implementation date
September 1, 2019
Scope
JG/T 567-2019 (Low density and high strength ceramic panel for building) is available as an English-translated PDF.
JG/T 567-2019 — This standard specifies the terms and definitions, classification and marking, requirements, and tests for lightweight high-strength ceramic plates for construction (referred to as lightweight high-strength ceramic plates).
Inspection methods, inspection rules, marking, packaging, transportation and storage. This standard applies to building curtain walls and lightweight high-strength ceramic plates for indoor and outdoor decoration.
Found what you need?
Document preview — JG/T 567-2019
National Standard of the People's Republic of China
- ICS
- 91.100.25
- Classification
- Q 31
Issued by: Ministry of Housing and Urban-Rural Development of the People's Republic of China
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- Foreword
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard was proposed by the Institute of Standardization of the Ministry of Housing and Urban-Rural Development.
This standard is under the jurisdiction of the Standardization Technical Committee for Building Products and Components of the Ministry of Housing and Urban-Rural Development.
1 Scope
This standard specifies the terms and definitions, classification and marking, requirements, and tests for lightweight high-strength ceramic plates for construction (referred to as lightweight high-strength ceramic plates).
Inspection methods, inspection rules, marking, packaging, transportation and storage.
This standard applies to building curtain walls and lightweight high-strength ceramic plates for indoor and outdoor decoration.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 191 packaging storage and transportation icon GB/T 3810.2 Test methods for ceramic tiles - Part 2. Examination of dimensions and surface quality GB/T 3810.3-2016 ceramic tile test methods - Part 3. water absorption, apparent porosity, apparent relative density and bulk density Determination GB/T 3810.7 Test methods for ceramic tiles - Part 7. Determination of wear resistance of glazed tiles GB/T 3810.8 Test methods for ceramics - Part 8. Determination of linear thermal expansion GB/T 3810.9 Test methods for ceramic tiles - Part 9. Determination of thermal shock resistance GB/T 3810.10 Test methods for ceramic tiles - Part 10. Determination of wet expansion GB/T 3810.11 Test methods for ceramic tiles - Part 11. Determination of glaze resistance GB/T 3810.12 Test methods for ceramic tiles - Part 12. Determination of freeze resistance GB/T 3810.13 Test methods for ceramics - Part 13. Determination of chemical resistance GB/T 3810.14 Test methods for ceramic tiles - Part 14. Determination of pollution resistance GB 6566-2010 Radionuclide limited edition of building materials GB/T 9195 Building Sanitary Ceramics Classification and Terminology GB/T 13891 Building Finishing Material Mirror Gloss Measurement Method GB/T 22588 flash method for measuring thermal diffusivity or thermal conductivity HJ/T 297-2006 Environmental Labeling Products Technical Requirements Ceramic Tiles JC/T 2172 Fine Ceramic Elastic Modulus, Shear Modulus and Poisson's Ratio Test Method Pulse Excitation Method JG/T 463 artificial quartz slab for architectural decoration
3 Terms and definitions
The following terms and definitions as defined in GB/T 9195 apply to this document.
Lightweight high strength ceramic plate lowdensityandhighstrengthceramicpanel A micro-foamed ceramic plate having a bulk density of 1.75 g/cm 3 to 1.95 g/cm 3 , an average bending strength of >= 28 MPa, and a minimum value of >= 23 MPa.
Soft throwing softpolish A surface finish that uses a soft abrasive block to polish the surface of the product to achieve the desired gloss.
JG/T 567-2019
Low density and high strength ceramic panel for building ICS 91.100.25 Q31 People's Republic of China Construction Industry Standard Lightweight high-strength ceramic plate for construction Published on 2019-03-04 2019-09-01 implementation Ministry of Housing and Urban-Rural Development Content Foreword III
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 Classification and Marking 2
5 Requirements 2
6 Test method 4
7 Inspection rules 7
8 Marking, packaging, transportation and storage 8
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard was proposed by the Institute of Standardization of the Ministry of Housing and Urban-Rural Development.
This standard is under the jurisdiction of the Standardization Technical Committee for Building Products and Components of the Ministry of Housing and Urban-Rural Development.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 7 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 3810.2Test methods of ceramic tiles - Part 2: Determination of dimensions and surface quality
- GB/T 3810.3-2016Test method of ceramic tiles - Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density
- GB/T 3810.7Test methods of ceramic tiles -- Part 7: Determination of resistance to surface abrasion for glazed tiles
- GB/T 3810.8Test methods of ceramic tiles -- Part 8: Determination of linear thermal expansion
- GB/T 3810.9Test methods of ceramic tiles -- Part 9: Determination of resistance to thermal shock
How to Download JG/T 567-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 6566-2010 — Limits of radionuclides in building materials
GB/T 13891-2008 — Test methods of specular gloss for decorative building materials
GB/T 191-2025 — Graphical symbols marking for handling and storage of packages
Secure payment via Stripe
Payments accepted
JG/T 567-2019
$234.00