JB/T 9577-2011Specification for the Z series of medium size DC motor (English PDF)
Z系列中型直流电动机技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 9577-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 20, 2011
Implementation date
April 1, 2012
Scope
JB/T 9577-2011 is the English-translated version of Z系列中型直流电动机技术条件.
JB/T 9577-2011 is a recommended Chinese machinery industry standard covering the Z series of medium size direct current motors. It sets the types, the basic parameters and dimensions, the technical requirements, the inspection rules and the provisions for marking, packaging and the warranty period.
It applies to Z series medium DC motors with a centre height from 355 mm to 710 mm, and also to DC motors of other structural types derived from that series. The standard is classified K23 in the Chinese scheme and 29.160.30 internationally, and was issued by the Ministry of Industry and Information Technology.
Among the standards it cites are GB/T 997-2008, GB 10068-2008 and GB/T 22716-2008. It supersedes JB/T 9577-1999.
Found what you need?
Document preview — JB/T 9577-2011
National Standard of the People's Republic of China
- ICS
- 29.160.30
- Replacing
- JB/T 9577-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 9577-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 20 December 2011 and has been in force since 1 April 2012.
It replaces the earlier edition JB/T 9577-1999.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard covering the Z series of medium size direct current motors. It sets the types, the basic parameters and dimensions, the technical requirements, the inspection rules and the provisions for marking, packaging and the warranty period. It applies to Z series medium DC motors with a centre height from 355 mm to 710 mm, and also to DC motors of other structural types derived from that series. The standard is classified K23 in the Chinese scheme and 29.160.30 internationally, and was issued by the Ministry of Industry and Information Technology. Among the standards it cites are GB/T 997-2008, GB 10068-2008 and GB/T 22716-2008. It supersedes JB/T 9577-1999.
JB/T 9577-2011 falls under ICS 29.160.30, in the field of electrical engineering.
This catalogue holds 619 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 191-2008 — Packaging - Pictorial marking for handling of goods
GB/T 997-2008 — Rotating electrical machines - Classification of types of construction, mounting arrangements and terminal box position (IM Code)
GB/T 1311-2008 — Test procedure for direct current machines
GB 1971-2006 — Rotating Electrical Machines - Terminal Markings and Direction of Rotation
GB/T 1993-1993 — Cooling methods for rotating electrical machines
GB/T 2900.33-2004 — Electrotechnical terminology -- Power electronics
GB/T 4772.2-1999 — Dimensions and output series for rotating electrical machines. Part 2: Frame numbers 355 to 1 000 and flange numbers 1 180 to 2 360
GB/T 4942.1-2006 — Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification
GB 10068-2008
GB/T 10069.1-2006 — Measurement of airborne noise emitted by rotating electrical machines and the noise limits -- Part 1: Method for the measurement of airborne noise emitted by rotating electrical machines
GB/T 12665-2008 — Requirements of damp-heat testing of electrical machine for service in general environmental condition
GB 14711-2006 — Safety requirements of small and medium size rotating electrical machines
GB/T 22716-2008 — Test specifications of interturn insulation of armature winding for DC electrical machines
GB/T 22717-2008 — Test specifications of interturn insulation of field pole coil and field winding for electrical machines
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 9577-1999 (earlier edition)
Standards on related subjects:
JB/T 1012-2017 — Specification for YY series capacitor-run induction motors
JB/T 9542-2015 — General specification for two-value capacitor asynchronous motors
GB/T 7345-2008 — General requirements for electrical machine for automatic control system
JB/T 5276-2017 — Small-power DC motors - General technical requirements
JB/T 6518-2015 — Basic technical requirements for large DC machines for rolling mills
JB/T 8163-2011 — DC motors for auxiliary drives of rolling mills
6 Classification and status
International classification (ICS): 29.160.30
Chinese Standard Classification (CCS): K 23
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191-2008Graphical symbols marking for handling and storage of packages
- GB/T 997-2008Classification of types of construction, mounting arrangements and terminal box position (IM Code) for rotating electrical machines
- GB/T 1311-2008Test methods for direct current machines
- GB 1971-2006Rotating Electrical Machines - Terminal Markings and Direction of Rotation
- GB/T 1993-1993Cooling methods for rotating electrical machines
- GB/T 2900.33-2004Electrotechnical terminology -- Power electronics
Similar standards
Editions of JB/T 9577
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 9577-2011 | Specification for the Z series of medium size DC motor | current edition | Current |
| JB/T 9577-1999 | Specification for the Z series of medium size DC motor | previous edition | Superseded |
This page sells the current edition, JB/T 9577-2011. Earlier editions are listed for reference only.
How to Download JB/T 9577-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 14711-2006 — Safety requirements of small and medium size rotating electrical machines
GB 1971-2006 — Rotating Electrical Machines - Terminal Markings and Direction of Rotation
GB/T 10069.1-2006 — Measurement of airborne noise emitted by rotating electrical machines and the noise limits -- Part 1: Method for the measurement of airborne noise emitted by rotating electrical machines
JB/T 9577-2011
$225.00