JB/T 9157-2011Ball expansion plugs for fluid power - Dimensions and tolerances (English PDF)
液压气动用球涨式堵头 尺寸及公差
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 9157-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
August 15, 2011
Implementation date
November 1, 2011
Scope
JB/T 9157-2011 is the English-translated version of 液压气动用球涨式堵头 尺寸及公差.
JB/T 9157-2011 is a recommended Chinese machinery industry standard for ball expansion plugs used in fluid power. It fixes the dimensions and tolerances of the plug itself and, taken separately, the dimensions and tolerances of the mounting hole that receives it.
The plugs it applies to are those fitted in hydraulic and pneumatic systems and components whose maximum working pressure is 40 MPa. The standard carries the Chinese classification J20 and the international classification 23.100.40, and it quotes GB/T 1800.2.
It replaces JB/T 9157-1999, the edition that came before it, and the Ministry of Industry and Information Technology is given as the issuing agency.
Found what you need?
Document preview — JB/T 9157-2011
National Standard of the People's Republic of China
- ICS
- 23.100.40
- Replacing
- JB/T 9157-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 9157-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 15 August 2011 and has been in force since 1 November 2011.
It replaces the earlier edition JB/T 9157-1999.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard for ball expansion plugs used in fluid power. It fixes the dimensions and tolerances of the plug itself and, taken separately, the dimensions and tolerances of the mounting hole that receives it. The plugs it applies to are those fitted in hydraulic and pneumatic systems and components whose maximum working pressure is 40 MPa. The standard carries the Chinese classification J20 and the international classification 23.100.40, and it quotes GB/T 1800.2. It replaces JB/T 9157-1999, the edition that came before it, and the Ministry of Industry and Information Technology is given as the issuing agency.
JB/T 9157-2011 falls under ICS 23.100.40, in the field of fluid systems and general-purpose components.
This catalogue holds 421 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 1800.2
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 9157-1999 (earlier edition)
Standards on related subjects:
GB/T 7932-2017 — Pneumatic fluid power -- General rules and safety requirements for systems and their components
GB/T 13871.5-2015 — Rotary shaft lip-type seals incorporating elastomeric sealing elements -- Part 5: Identification of visual imperfections
JB/T 8727-2004 — Hydraulic hose assemblies
JB/T 7737-2025 — Piston and vane air motors
JB/T 6948-2025 — Reduced air motor
JB/T 7041.1-2023 — Hydraulic Pumps - Part 1: Vane Pumps
6 Classification and status
International classification (ICS): 23.100.40
Chinese Standard Classification (CCS): J 20
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of JB/T 9157
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 9157-2011 | Ball expansion plugs for fluid power - Dimensions and tolerances | current edition | Current |
| JB/T 9157-1999 | Ball expansion plugs for fluid power - Dimensions and tolerances | previous edition | Superseded |
This page sells the current edition, JB/T 9157-2011. Earlier editions are listed for reference only.
How to Download JB/T 9157-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1800.2-1998 — Limits and fits--Bases--Part 2: Basic rules of tolerances, deviations and fits
GB/T 1800.2-2009 — Geometrical product specifications (GPS) - Limits and fits - Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts
GB/T 1800.2-2020 — Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
JB/T 9157-2011
$135.00