JB/T 9039-2010Two-rolls strong intensity electromagnetic separator (English PDF)
电磁双辊强磁选机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 9039-2010 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
January 13, 2011
Implementation date
April 1, 2011
Scope
JB/T 9039-2010 is the English-translated version of 电磁双辊强磁选机.
JB/T 9039-2010 is a recommended Chinese machinery industry standard for the two-rolls strong intensity electromagnetic separator. Its provisions run from product classification and technical requirements to test methods and inspection rules, and then to marking, labelling, the instruction manual, packaging, transport and storage.
The separator covered serves the separation of weakly magnetic material and the purification of non-magnetic material, and use on polymetallic minerals is mentioned as well.
The standard is classified D96 in the Chinese scheme and 73.120 in the international one. GB 7251.1, GB/T 9969, GB/T 9971 and JB/T 5000.13 are among the standards it quotes. It replaces JB/T 9039-1999.
Found what you need?
Document preview — JB/T 9039-2010
National Standard of the People's Republic of China
- ICS
- 73.120
- Replacing
- JB/T 9039-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 9039-2010 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 13 January 2011 and has been in force since 1 April 2011.
It replaces the earlier edition JB/T 9039-1999.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard for the two-rolls strong intensity electromagnetic separator. Its provisions run from product classification and technical requirements to test methods and inspection rules, and then to marking, labelling, the instruction manual, packaging, transport and storage. The separator covered serves the separation of weakly magnetic material and the purification of non-magnetic material, and use on polymetallic minerals is mentioned as well. The standard is classified D96 in the Chinese scheme and 73.120 in the international one. GB 7251.1, GB/T 9969, GB/T 9971 and JB/T 5000.13 are among the standards it quotes. It replaces JB/T 9039-1999.
JB/T 9039-2010 falls under ICS 73.120, in the field of mining and minerals.
This catalogue holds 265 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 191
GB/T 1720-1989
GB/T 3768
GB/T 6388
GB 7251.1
GB/T 9969
GB/T 9971
GB/T 13306
GB/T 13384
JB/T 1604
JB/T 5000.12
JB/T 5000.13
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 9039-1999 (earlier edition)
Standards on related subjects:
JB/T 14329-2021 — Ring-roller micro powder mills
JB/T 9023.1-2019 — Down-the-hole drill rigs - Part 1: Open-pit mining type
GB/T 10605-2015 — Center driving rotary-rake thickener
JB/T 9046-2025 — Grille cleaner
JB/T 9041-2025 — Adsorption tank
JB/T 9042-2017 — Permanent magnet blocks for ore dressing equipment
6 Classification and status
International classification (ICS): 73.120
Chinese Standard Classification (CCS): D 96
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 1720-1989Circle-drawing test of coating films
- GB/T 3768Acoustics -- Determination of sound power levels and sound energy levels of noise sources using sound pressure -- Survey method using an enveloping measurement surface over a reflecting plane
- GB/T 6388Transport package shipping mark
- GB 7251.1Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies
- GB/T 9969General principles for preparation of instructions for use of industrial products
Editions of JB/T 9039
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 9039-2010 | Two-rolls strong intensity electromagnetic separator | current edition | Current |
| JB/T 9039-1999 | Two-rolls strong intensity electromagnetic separator | previous edition | Superseded |
This page sells the current edition, JB/T 9039-2010. Earlier editions are listed for reference only.
How to Download JB/T 9039-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 7251.1-1997 — Low-voltage switchgear and controlgear assemblies. Part 1: Type-tested and partially type-tested assemblies
GB 7251.1-2005 — Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies
GB/T 13306-1991 — Plates
JB/T 9039-2010
$105.00