JB/T 8792-2010Contactor relays (English PDF)
接触器式继电器
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 8792-2010 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
February 11, 2010
Implementation date
July 1, 2010
Scope
JB/T 8792-2010 is the English-translated version of 接触器式继电器.
JB/T 8792-2010 is a recommended Chinese machinery industry standard for contactor relays of the JZC series. It gives terms and definitions, symbols, classification, characteristics, the product information to be supplied, the normal conditions of use, installation and transport, the requirements for construction and performance, and the tests.
It applies to JZC series contactor relays, called relays, among which JZC2, JZC3 and JZC4 are listed. Such relays serve control circuits at AC 50 Hz or 60 Hz up to 660 V and DC up to 220 V, working as signal amplifying or signal control components.
It replaces JB/T 8792-1998, sits under Chinese classification K33, and among the standards it quotes are GB 14048.1-2006 and GB 14048.5-2008.
Found what you need?
Document preview — JB/T 8792-2010
National Standard of the People's Republic of China
- ICS
- 29.120.70
- Replacing
- JB/T 8792-1998
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
1 Foreword
JB/T 8792-2010 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 11 February 2010 and has been in force since 1 July 2010.
It replaces the earlier edition JB/T 8792-1998.
2 Scope
This standard is a recommended Chinese machinery industry standard for contactor relays of the JZC series. It gives terms and definitions, symbols, classification, characteristics, the product information to be supplied, the normal conditions of use, installation and transport, the requirements for construction and performance, and the tests. It applies to JZC series contactor relays, called relays, among which JZC2, JZC3 and JZC4 are listed. Such relays serve control circuits at AC 50 Hz or 60 Hz up to 660 V and DC up to 220 V, working as signal amplifying or signal control components. It replaces JB/T 8792-1998, sits under Chinese classification K33, and among the standards it quotes are GB 14048.1-2006 and GB 14048.5-2008.
3 Normative references
JB/T 8792-2010 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 2828.1-2003
GB/T 2900.18-2008 — Electrotechnical terminology - Low voltage apparatus
GB/T 4207-2003
GB/T 5169.10-2006
GB/T 5169.11-2006
GB/T 13384
GB 14048.1-2006
GB 14048.4-2003
GB 14048.5-2008
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 8792-1998 (earlier edition)
6 Classification and status
International classification (ICS): 29.120.70
Chinese Standard Classification (CCS): K 33
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 2828.1-2003Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB/T 2900.18-2008Electrotechnical terminology - Low voltage apparatus
- GB/T 4207-2003Method for the determination of the proof and the comparative tracking indices of solid insulating materials
- GB/T 5169.10-2006Fire hazard testing for electric and electronic products -- Part 10: Glowing/hot-wire based test methods -- Glow-wire apparatus and common test procedure
- GB/T 5169.11-2006Fire hazard testing for electric and electronic products -- Part 11: Glowing/hot-wire based test methods -- Glow-wire flammability test method for end-products (GWEPT)
- GB/T 13384General specifications for packing of mechanical and electrical product
Similar standards
Editions of JB/T 8792
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 8792-2010 | Contactor relays | current edition | Current |
| JB/T 8792-1998 | Contactor relays | previous edition | Superseded |
This page sells the current edition, JB/T 8792-2010. Earlier editions are listed for reference only.
How to Download JB/T 8792-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 14048.1-2006 — Low-voltage switchgear and controlgear - Part 1: General rules
GB 14048.4-2003 — Low-voltage switchgear and controlgear - Electromechanical contactors and motor-starters
GB/T 13384-1992 — General speifications for packagings of mechanical and electrical products
Secure payment via Stripe
Payments accepted
JB/T 8792-2010
$195.00