Valid

JB/T 8607-2011Continuous mould conveyor - Technical requirements (English PDF)

连续式铸型输送机 技术条件

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 8607-2011 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

May 18, 2011

Implementation date

August 1, 2011

Scope

JB/T 8607-2011 is the English-translated version of 连续式铸型输送机 技术条件.

JB/T 8607-2011 is a recommended Chinese machinery industry standard that sets the technical requirements for continuous mould conveyors, the machine its text shortens to the conveyor, along with the test methods, the inspection rules and the provisions for signs, packaging, transport and the warranty.

It applies to motor-driven mould conveyors that run continuously in the horizontal plane on a closed trolley route. Among the standards it quotes are GB 5226.1, GB/T 9969, GB/T 10095.2-2008, GB/T 25711-2010, GB 50270, JB/T 5365.1 and JB/T 8609.

It supersedes JB/T 8607-1997, sits under CCS J61 and ICS 25.120.30, and was issued by the Ministry of Industry and Information Technology.

Found what you need?

Document preview — JB/T 8607-2011

National Standard of the People's Republic of China

ICS
25.120.30
Replacing
JB/T 8607-1997

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.1 Electroplated Inner Cutting Disc
  • 3.2 Electroplated Needle File
  • 3.3 Electroplated Grinding Head
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Performance
  • 4.3 Safety and protection
  • 4.4 Castings, forgings and weldments
  • 4.5 Machining
  • 4.6 No-load operation requirements
  • 4.7 Load operation requirements
  • 4.8 Motion accuracy
  • 5 Test methods
  • 5.1 Appearance
  • 5.2 Protection requirements
  • 5.3 Machining and assembly quality of components
  • 5.4 Appearance quality
  • 5.5 Installation requirements for fire extinguishers
  • 5.6 Functional test requirements
  • 5.7 Anti-interference capability and functional stability test requirements
  • 5.8 Mass per unit area
  • 5.9 Tensile breaking force
  • 6 Inspection rules
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 6.3 Joint surfaces
  • 6.4 Numerical control system
  • 6.5 Working fluid system
  • 6.6 Lubrication system
  • 6.7 Machine running test
  • 6.8 Accuracy inspection
  • 6.9 Others
  • 7 Marking, packaging, transportation and storage
  • 7.2 Machining and assembly of components
  • 7.9 Load operation test
  • 8.1 General
  • 8.2 Inspection principles
  • 8.3 Inspection items
  • 8.4 Conformity judgment
  • 8.5 Storage
  • 9.1 Marking
  • 9.2 Packaging
  • 9.3 Transportation

1 Foreword

JB/T 8607-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 18 May 2011 and has been in force since 1 August 2011.

It replaces the earlier edition JB/T 8607-1997.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard is a recommended Chinese machinery industry standard that sets the technical requirements for continuous mould conveyors, the machine its text shortens to the conveyor, along with the test methods, the inspection rules and the provisions for signs, packaging, transport and the warranty. It applies to motor-driven mould conveyors that run continuously in the horizontal plane on a closed trolley route. Among the standards it quotes are GB 5226.1, GB/T 9969, GB/T 10095.2-2008, GB/T 25711-2010, GB 50270, JB/T 5365.1 and JB/T 8609. It supersedes JB/T 8607-1997, sits under CCS J61 and ICS 25.120.30, and was issued by the Ministry of Industry and Information Technology.

JB/T 8607-2011 falls under ICS 25.120.30, in the field of manufacturing engineering.

This catalogue holds 1,459 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

GB 5226.1

GB/T 9969

GB/T 10095.2-2008 — Cylindrical gears - System of accuracy - Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information

GB/T 13306

GB 20905

GB/T 25371

GB/T 25711-2010 — Foundry machinery - General technical requirements

GB 50270

JB/T 5365.1

JB/T 8356.1

JB/T 8356.2

JB/T 8609

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Other editions:

JB/T 8607-1997 (earlier edition)

Standards on related subjects:

GB/T 37365-2019 — Die casting unit—Performance testing method

GB/T 21269-2018 — Cold chamber die casting machines

JB/T 12243-2015 — Die-casting unit - Safety signs

JB/T 2205-2026 — Pressure reducing valve - Face-to-face dimensions

JB/T 1308.4-2026 — PN2500 ultrahigh pressure valves and fittings - Part 4: reduced pipe

JB/T 1308.3-2026 — PN2500 ultrahigh pressure valves and fittings - Part 3: Flange, fasteners and connections

6 Classification and status

International classification (ICS): 25.120.30

Chinese Standard Classification (CCS): J 61

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of JB/T 8607

EditionTitleRevisionStatus
JB/T 8607-2011Continuous mould conveyor - Technical requirementscurrent editionCurrent
JB/T 8607-1997Continuous mould conveyor - Technical requirementsprevious editionSuperseded

This page sells the current edition, JB/T 8607-2011. Earlier editions are listed for reference only.

How to Download JB/T 8607-2011

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 8607-2011

$105.00