JB/T 8595-2014Classification and Gradation for Surface Protection Coating of Machinery Products (English PDF)
机械产品表面防护层质量分等分级
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 8595-2014 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 6, 2014
Implementation date
October 1, 2014
Scope
JB/T 8595-2014 is the English-translated version of 机械产品表面防护层质量分等分级.
JB/T 8595-2014 is the recommended Chinese machinery industry standard that classifies and grades the surface protection coating of machinery products. It groups the protective layers applied to a product surface by quality, sets out the grades, and gives the test methods and inspection rules that go with them.
The grading is meant for machinery products used in tropical, damp tropical, cold northern, plateau and other such regions. The standard sits under the Chinese classification A21 and the international classification 19.020, and its tests follow GB/T 2423.1-2008, GB/T 2423.4-2008, GB/T 2423.17-2008 and GB/T 14522-2008.
It replaces JB/T 8595-1997. Issued on 6 May 2014, it has applied since 1 October 2014.
Found what you need?
Document preview — JB/T 8595-2014
National Standard of the People's Republic of China
- ICS
- 19.020
- Replacing
- JB/T 8595-1997
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 8595-2014 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 6 May 2014 and has been in force since 1 October 2014.
It replaces the earlier edition JB/T 8595-1997.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is the recommended Chinese machinery industry standard that classifies and grades the surface protection coating of machinery products. It groups the protective layers applied to a product surface by quality, sets out the grades, and gives the test methods and inspection rules that go with them. The grading is meant for machinery products used in tropical, damp tropical, cold northern, plateau and other such regions. The standard sits under the Chinese classification A21 and the international classification 19.020, and its tests follow GB/T 2423.1-2008, GB/T 2423.4-2008, GB/T 2423.17-2008 and GB/T 14522-2008. It replaces JB/T 8595-1997.
JB/T 8595-2014 falls under ICS 19.020, in the field of testing.
This catalogue holds 110 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 2423.1-2008 — Environmental testing for electric and electronic products - Part 2: Test methods - Tests A: Cold
GB/T 2423.4-2008 — Environmental testing for electric and electronic products - Part 2: Test method - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
GB/T 2423.17-2008 — Environmental testing for electric and electronic products - Part 2: Test method - Test Ka: Salt mist
GB/T 14522-2008 — Artificial weathering test method for plastics,coating and rubber materials used for machinery industrial products - Fluorescent UV lamps
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 8595-1997 (earlier edition)
Standards on related subjects:
GB/T 14092.2-2023 — Environmental conditions for machinery products - Part 2: Cold
GB/T 14092.1-2023 — Environmental conditions for machinery products - Part 1: Warm damp
GB/T 4798.2-2021 — Classification of environmental conditions - Classification of groups of environmental parameters and their severities - Part 2: Transportation and handling
JB/T 4375-2013 — Environmental conditions of electric products in indoor and outdoor corrosive location
JB/T 4160-2013 — Natural environmental conditions in the tropics for electric products
JB/T 4159-2013 — General technical requirements of electric products for tropical environment
6 Classification and status
International classification (ICS): 19.020
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 2423.1-2008Environmental testing for electric and electronic products - Part 2: Test methods - Tests A: Cold
- GB/T 2423.4-2008Environmental testing for electric and electronic products - Part 2: Test method - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
- GB/T 2423.17-2008Environmental testing - Part 2: Test methods - Test Ka: Salt mist
- GB/T 14522-2008Artificial weathering test method for plastics,coating and rubber materials used for machinery industrial products - Fluorescent UV lamps
Similar standards
Editions of JB/T 8595
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 8595-2014 | Classification and Gradation for Surface Protection Coating of Machinery Products | current edition | Current |
| JB/T 8595-1997 | Classification and Gradation for Surface Protection Coating of Machinery Products | previous edition | Superseded |
This page sells the current edition, JB/T 8595-2014. Earlier editions are listed for reference only.
How to Download JB/T 8595-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 14522-2008 — Artificial weathering test method for plastics,coating and rubber materials used for machinery industrial products - Fluorescent UV lamps
GB/T 2423.1-2008 — Environmental testing for electric and electronic products - Part 2: Test methods - Tests A: Cold
GB/T 2423.17-2008 — Environmental testing for electric and electronic products - Part 2: Test method - Test Ka: Salt mist
JB/T 8595-2014
$205.00