JB/T 8593-2013Dimensional requirements for boxes, cover-plate and adjusting plate for fixed electrical accessory (English PDF)
电器附件用面板、调整板和安装盒尺寸要求
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 8593-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 31, 2013
Implementation date
July 1, 2014
Scope
JB/T 8593-2013 is the English-translated version of 电器附件用面板、调整板和安装盒尺寸要求.
JB/T 8593-2013 is the Chinese standard "Dimensional requirements for boxes, cover-plate and adjusting plate for fixed electrical accessory". Its scope clause reads: This standard specifies the dimensional requirements for cover-plates, adjusting plates and boxes for electrical accessories.
This standard is applicable to cover-plates, adjusting plates and boxes for mounting for household and similar purposes, with a rated voltage of 440 Va.c. and 630 Vd.c. or below and a rated current of 63 A or below.
It also applies to mounting or suspending boxes for luminaires and boxes for floor sockets. This standard neither applies to the cover-plates, adjusting plates and boxes in the combined electrical accessories equipped with overcurrent protection devices, nor to those in the busbar trunking type electrical accessories.
This standard does not apply to cover-plates, adjusting plates and boxes assembled with and specially designed for the equipment. Its clauses include terms and definitions.
Found what you need?
Document preview — JB/T 8593-2013
National Standard of the People's Republic of China
- ICS
- 29.120.01
- Replacing
- JB/T 8593-1997
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword i
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Dimensional requirements
- 5 Methods of measurements
- Bibliography
1 Scope
This standard specifies the dimensional requirements for cover-plates, adjusting plates and boxes for electrical accessories.
This standard is applicable to cover-plates, adjusting plates and boxes for mounting for household and similar purposes, with a rated voltage of 440 Va.c. and 630 Vd.c. or below and a rated current of 63 A or below.
It also applies to mounting or suspending boxes for luminaires and boxes for floor sockets.
This standard neither applies to the cover-plates, adjusting plates and boxes in the combined electrical accessories equipped with overcurrent protection devices, nor to those in the busbar trunking type electrical accessories.
This standard does not apply to cover-plates, adjusting plates and boxes assembled with and specially designed for the equipment.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced documents (including any amendment) applies.
GB/T 17194-1997 Conduits for electrical purposes — Outside diameters of conduits for electrical installations and threads of conduits and fittings
3 Terms and definitions
For the purpose of this document, the following terms and definitions apply.
3.1 cover-plate
part of an enclosure, not integral with or part of an accessory, which is used for either retaining the accessory in position or enclosing it […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
Similar standards
Editions of JB/T 8593
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 8593-2013 | Dimensional requirements for boxes, cover-plate and adjusting plate for fixed electrical accessory | current edition | Current |
| JB/T 8593-1997 | Dimensional requirements for boxes, cover-plate and adjusting plate for fixed electrical accessory | previous edition | Superseded |
This page sells the current edition, JB/T 8593-2013. Earlier editions are listed for reference only.
How to Download JB/T 8593-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 17194-1997 — Conduits for electrical purposes. Outside diameters of conduits for electrical installations and threads of conduits and fittings
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 8593-2013
$409.00