GB/T 17466.23-2022Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 23: Particular requirements for floor boxes and enclosures (English PDF)
家用和类似用途固定式电气装置的电器附件安装盒和外壳 第23部分：地面安装盒和外壳的特殊要求
This is a limited preview
Buy now to download the full PDF (17 pages)
Need quotation for your management?
Get a formal quotation for GB/T 17466.23-2022 in 30 minutes.
Issued by
State Administration for Market Regulation, China National Standardization Administration
Level / Type
National · Recommended
Issue date
April 15, 2022
Implementation date
November 1, 2022
Scope
GB/T 17466.23-2022 is the English-translated version of 家用和类似用途固定式电气装置的电器附件安装盒和外壳 第23部分：地面安装盒和外壳的特殊要求.
GB/T 17466.23-2022 is the Chinese standard "Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 23: Particular requirements for floor boxes and enclosures".
Its scope clause reads: This document specifies the technical requirements for the marking, protection against electric shock, structure, mechanical properties, and electrical properties of ground-mounted boxes and enclosures.
This chapter of GB/T 17466.1-2019 shall apply after adding the following contents. Add after the fourth paragraph. This document applies to mounting boxes and enclosures.
Concealed floor mount boxes and concealed floor enclosures are intended to protect accessories from load pressures not greater than 1000N. Note. Outdoor requirements are under consideration. Its clauses include terms and definitions; general requirements.
Found what you need?
Document preview — GB/T 17466.23-2022
National Standard of the People's Republic of China
- Classification
- K 65
Issued by: State Administration for Market Regulation, China National Standardization Administration
Contents
- Preface
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 General Requirements
- 5 General notes on testing
- 6 Rating
- 7 Category
- 8 Flags
- 9 size
- 10 Protection against electric shock
- 11 Ground protection
- 12 Structure
- 13 Anti-aging, anti-solid foreign body ingress and anti-harmful water ingress
- 14 Insulation resistance and electrical strength
- 15 Mechanical strength
- 16 Heat resistant
- 17 Creepage distances, clearances and distances through sealant
- 18 Resistance to abnormal heat and fire of insulating materials
- 19 Tracking resistance
- 20 Anti-rust
- 21 Electromagnetic Compatibility (EMC)
1 Scope
This document specifies the technical requirements for the marking, protection against electric shock, structure, mechanical properties, and electrical properties of ground-mounted boxes and enclosures.
This chapter of GB/T 17466.1-2019 shall apply after adding the following contents.
Add after the fourth paragraph.
This document applies to mounting boxes and enclosures.
Concealed floor mount boxes and concealed floor enclosures are intended to protect accessories from load pressures not greater than 1000N.
Note. Outdoor requirements are under consideration.
2 Normative references
This chapter of GB/T 17466.1-2019 applies.
3 Terms and Definitions
This chapter of GB/T 17466.1-2019 applies to this document after adding the following terms and definitions.
3.101
Loaded and renovated floors with or without covering materials such as carpet, tile, vinyl or wood.
3.102 Dry treatment of floor
Treat the ground with no liquid or only a small amount of liquid applied and sprayed in such an amount that silt will not form and the floor covering will not
A process of cleaning and/or maintenance that occurs wet.
NOTE. Examples of dry treatments are. sweeping with a broom or carpet cleaner, vacuuming, brushing with dry cleaning powder, dry cleaning, wet cleaning
Carpet wash, treat with a cleaning carrier (use a solid material as a carrier for liquid chemical cleaners, e.g. wet sawdust, wet cloth, etc.)
3.103 Wet treatment of the floor
Use liquid cleaning to treat the floor, it is not ruled out that the liquid has formed a deposit, and the floor covering will be soaked for a period of time for cleaning and/or maintenance process.
Note. Examples of ground wet treatment are. wet scrubbing, manual or machine wiping.
4 General requirements
This chapter of GB/T 17466.1-2019 applies. […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.
Referenced standards
How to Download GB/T 17466.23-2022
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 17466.1-2019 — Boxes and enclosures for electrical accessories for household and similar fixed electrical installations -- Part 1: General requirements
GB/T 17466.21-2022 — Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 21: Particular requirements for boxes and enclosures with provision for suspension means
GB/T 17466.22-2022 — Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 22: Particular requirements for connecting boxes and enclosures
Secure payment via Stripe
Payments accepted
GB/T 17466.23-2022
$180.00